| 变齿厚渐开线齿轮副啮合效率研究 |
| |
| 引用本文： | 蒋汉军,王光建,褚志刚. 变齿厚渐开线齿轮副啮合效率研究[J]. 机械传动, 2011, 35(6): 10-14 |
| |
| 作者姓名： | 蒋汉军 王光建 褚志刚 |
| |
| 作者单位： | 重庆大学,机械传动国家重点实验室,重庆,400044 |
| |
| 摘 要： | 由于变齿厚渐开线啮合副变位系数沿轴向变化的特点,其啮合角、锥角、重合度、不同端截面齿顶圆上的压力角、滑动率等参数与普通渐开线啮合副不同,其啮合效率计算也与普通渐开线啮合副有所区别.分析了变齿厚齿轮啮合副效率的计算特点和影响因素,如变位系数对变齿厚齿轮副重合度和啮合效率的影响;在此基础上,提出了一种新型效率计算方法;通过...
|
| 关 键 词： | 变齿厚 啮合效率 变位系数 |
Research on the Meshing Efficiency of Variable Tooth Thickness Gear |
| |
| Jiang Hanjun,Wang Guangjian,Chu Zhigang. Research on the Meshing Efficiency of Variable Tooth Thickness Gear[J]. Journal of Mechanical Transmission, 2011, 35(6): 10-14 |
| |
| Authors: | Jiang Hanjun Wang Guangjian Chu Zhigang |
| |
| Affiliation: | Jiang Hanjun Wang Guangjian Chu Zhigang(State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400044,China) |
| |
| Abstract: | Due to the characteristics of modification coefficient change along the axial in variable tooth thickness gears,the contact angle,cone angle,contact ratio,pressure angle of addendum circle in different normal section,sliding rate and other parameters are deviated from common involute meshing pairs,and the meshing efficiency calculation formula is also different with the common involute meshing pairs.Calculation characteristics and influencing factors of conical involute gears,such as the influence of the mo... |
| |
| Keywords: | Variable tooth thickness Meshing efficiency Modification coefficient |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
