| 规则多孔铜的拉伸性能及其各向异性 |
| |
| 引用本文： | 彭震,杨天武,李再久,黎振华,金青林,周荣. 规则多孔铜的拉伸性能及其各向异性[J]. 中国有色金属学报, 2011, 21(5) |
| |
| 作者姓名： | 彭震 杨天武 李再久 黎振华 金青林 周荣 |
| |
| 作者单位： | 昆明理工大学材料科学与工程学院,昆明,650093 |
| |
| 基金项目： | 国家自然科学基金云南联合基金资助项目 |
| |
| 摘 要： | 采用固-气共晶定向凝固的方法制备规则多孔铜,研究其室温拉伸性能的各向异性和气孔率对拉伸力学性能的影响,建立表征抗拉强度与气孔率和拉伸方向相关的数学模型.结果表明:规则多孔铜的拉伸性能主要取决于材料的气孔率和拉伸方向;随着气孔率的增大,规则多孔铜的拉伸性能明显下降:规则多孔铜拉伸性能呈各向异性特征,0°方向性能最好,45°方向的次之,90°方向的最差;各拉伸方向的实验数据与模型数据吻合良好.断口分析表明:规则多孔铜呈韧性断裂,拉伸断裂从孔壁处开始,最终因颈缩导致完全断裂.
|
| 关 键 词： | 规则多孔铜 各向异性 力学性能 气孔率 应力集中 |
Tensile properties and anisotropy of ordered porous copper |
| |
| PENG Zhen,YANG Tian-wu,LI Zai-jiu,LI Zhen-hua,JIN Qing-lin,ZHOU Rong. Tensile properties and anisotropy of ordered porous copper[J]. The Chinese Journal of Nonferrous Metals, 2011, 21(5) |
| |
| Authors: | PENG Zhen YANG Tian-wu LI Zai-jiu LI Zhen-hua JIN Qing-lin ZHOU Rong |
| |
| Affiliation: | PENG Zhen,YANG Tian-wu,LI Zai-jiu,LI Zhen-hua,JIN Qing-lin,ZHOU Rong(School of Materials Science and Engineering,Kunming University of Science and Technology,Kunming 650093,China) |
| |
| Abstract: | The ordered porous copper with cylindrical pores aligned in one direction was fabricated by the solid-gas eutectic solidification process.The anisotropy of tensile properties and the porosity of ordered porous copper at room temperature were investigated.In order to discuss the effects of porosity and tensile direction on ultimate tensile strength,the stress concentration models were established.The results show that the tensile properties of ordered porous copper depend on the porosity and tensile directio... |
| |
| Keywords: | ordered porous copper anisotropy mechanical properties porosity stress concentration |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
