| 树状大分子聚酰胺-胺固化环氧树脂性能研究 |
| |
| 引用本文： | 赵粉娟,郭秀生,于德梅,胡加娟.树状大分子聚酰胺-胺固化环氧树脂性能研究[J].工程塑料应用,2009,37(12). |
| |
| 作者姓名： | 赵粉娟 郭秀生 于德梅 胡加娟 |
| |
| 作者单位： | 西安交通大学应用化学系,西安,710049 |
| |
| 摘 要： | 采用发散法由乙二胺和丙烯酸甲酯合成了树状聚酰胺-胺(PAMAM).以PAMAM作为环氧树脂(EP)的固化剂,用差示扫描量热法确定其固化工艺及固化物的玻璃化转变温度(T_g),探讨了树状PAMAM用量对固化物力学性能的影响.结果表明,PAMAM与EP的质量比为0.26时,固化物的力学性能最佳,其冲击强度为166.43 kJ/m~2,拉伸强度为43.54 Mpa;明显高于低分子量聚酰胺/EP固化物的冲击强度和拉伸强度.
|
| 关 键 词： | 环氧树脂 固化 力学性能 |
STUDY ON THE PROPERTIES OF DENDRITIC POLY(AMIDOAMINE) CURED EPOXY RESIN |
| |
| Zhao Fenjuan,Guo Xiusheng,Yu Demei,Hu Jiajuan.STUDY ON THE PROPERTIES OF DENDRITIC POLY(AMIDOAMINE) CURED EPOXY RESIN[J].Engineering Plastics Application,2009,37(12). |
| |
| Authors: | Zhao Fenjuan Guo Xiusheng Yu Demei Hu Jiajuan |
| |
| Affiliation: | Zhao Fenjuan,Guo Xiusheng,Yu Demei,Hu Jiajuan( Department of Applied Chemistry,Xi\' an Jiaotong University,Xi\' an 710049,China) |
| |
| Abstract: | Dendritic Poly(amidoamine) (PAMAM) with peripheral amimo groups was synthesized with ethylenediamine and methyl acrylate. Using PAMAM as epoxy resin curing agents, the curing processing and the glass translation temperature ( T_g ) were determined by DSC. The influence of PAMAM contents on the mechanical properties of cured resin was studied. The results showed that, the optimum mechanical properties were obtained at the mass ratio of PAMAM to epoxy resin for 0.26, the impact strength was 166.43 kJ/m~2 and ... |
| |
| Keywords: | PAMAM PAMAM epoxy curing mechanical property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
