|
|||||
|
|
| 基于PLC的多轴控制研究 | |
| 引用本文： | 王海,李洪奎,刘晓东. 基于PLC的多轴控制研究[J]. 中国工程机械学报, 2008, 6(4): 470-472 |
| 作者姓名： | 王海 李洪奎 刘晓东 |
| 作者单位： | 1. 沈阳理工大学,机械工程学院,辽宁,沈阳,110168 2. 沈阳理工大学,理学院,辽宁,沈阳,110168 3. 中石油兰州石化分公司机械厂,甘肃,兰州,730060 |
| 基金项目： | 辽宁省博士科研启动基金 |
| 摘 要： | 位置控制是可编程序逻辑控制器（PLC）的重要应用.针对多轴控制的需求,以松下FP0为例,提出通过软件方式,采用轴组间切换处理实现多伺服轴控制的原理,并给出从命令代码下发到各种运动功能实现的基本过程,并指出其应用范围和实际意义. |
| 关 键 词： | 多轴控制 位置控制 激活轴 轴组 保持寄存器 |
Investigation into PLC-based multi-axis control |
|
| WANG Hai,LI Hong-kui,LIU Xiao-dong. Investigation into PLC-based multi-axis control[J]. Chinese Journal of Construction Machinery, 2008, 6(4): 470-472 | |
| Authors: | WANG Hai LI Hong-kui LIU Xiao-dong |
| Affiliation: | WANG Hai1,LI Hong-kui2,LIU Xiao-dong3(1.School of Mechanical Engineering,Shenyang LiGong University,Shenyang 110168,China,2.Science College,Shenyang Ligong University,3.Petrochina Lanzhou Petrochemical Company Machinery Plant,Lanzhou 730060,China) |
| Abstract: | The positional control is associated with a critical PLC application.By the means of software realization via Toshiba FP0,the multiple servo-axis control is conducted through axis-group switching.Meanwhile,the instruction codes are sent to motional functionalities.Finally,the applicable scope and significance are presented. |
| Keywords: | multi-axis control positional control activation axis axis group preservation register |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
