首页 | 官方网站   微博 | 高级检索  
     

残留奥氏体对中碳双相钢冲击性能的影响
引用本文:史园园,胡锋. 残留奥氏体对中碳双相钢冲击性能的影响[J]. 中国冶金, 2015, 25(1): 21-25. DOI: 10.13228/j.boyuan.issn1006-9356.20140094
作者姓名:史园园  胡锋
作者单位:1.南京钢铁联合有限公司线带厂, 江苏 南京 210035 2.南京钢铁联合有限公司研究院, 江苏 南京 210035
摘    要:采用不同的热处理工艺研究了残留奥氏体对中碳双相钢冲击韧性的影响。利用金相显微镜、扫描电镜、透射电镜和摆锤式冲击试验机,对不同试样的显微组织与冲击韧性进行观察、检测和分析。试验结果表明:中碳贝氏体钢的冲击性能显著高于Q/P马氏体钢(室温冲击功是57J对应15J,-40℃冲击功是33J对应9J),可能的原因是贝氏体钢中薄膜状残留奥氏体,对裂纹扩展的阻止效应更显著。

关 键 词:等温贝氏体  Q&P马氏体  热处理工艺  残留奥氏体稳定性  冲击韧性  

Effect of retained austenite on the impact properties in medium-carbon dual-phase steels
SHI Yuan-yuan,HU Feng. Effect of retained austenite on the impact properties in medium-carbon dual-phase steels[J]. China Metallurgy, 2015, 25(1): 21-25. DOI: 10.13228/j.boyuan.issn1006-9356.20140094
Authors:SHI Yuan-yuan  HU Feng
Affiliation:(1.Wire and Strip Mill of Nanjing Iron and Steel United Co., Ltd., Nanjing 210035, Jiangsu, China 2.Research Institute of Nanjing Iron and Steel United Co., Ltd., Nanjing 210035, Jiangsu, China)
Abstract:The effect of retained austenite on the impact toughness in medium-carbon dual-phase steels were analyzed by different heat treatment processes. The microstructure and impact toughness of different steels were observed, detected and analyzed by the optical microscopy (OM), scanning electron microscopy (SEM), TEM (transmission electron microscopy) and charpy impact machine. The results show that the impact properties of bainitic steel was significantly higher than Q/P martensitic steels with medium-carbon (impact energy in room temperature was 57J against 16J, impact energy in -40℃ temperature was 33J against 9J). The possible reason is that bainitic steels with retained austenite film was more pronounced to prevent crack propagation effects.
Keywords:Isothermal bainite   Q&P martensite   Heat treatment process   Stability of retained austenite   Impact toughness   
本文献已被 CNKI 等数据库收录!
点击此处可从《中国冶金》浏览原始摘要信息
点击此处可从《中国冶金》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号