首页 | 官方网站   微博 | 高级检索  
     

稀土对纯铜和BFe10-1-1合金再结晶温度的影响
引用本文:林高用,孙利平,文继有,魏笔,张胜华. 稀土对纯铜和BFe10-1-1合金再结晶温度的影响[J]. 金属热处理, 2009, 34(2)
作者姓名:林高用  孙利平  文继有  魏笔  张胜华
作者单位:1. 中南大学,材料科学与工程学院,湖南,长沙,410083
2. 高新张铜股份有限公司,江苏,张家港,215600
基金项目:江苏省科技成果转化基金 
摘    要:在纯铜和BFe10-1-1铁白铜中添加不同比例的稀土元素,经熔铸、轧制和热处理试验,通过对试样进行组织与力学性能分析,研究了稀土对其再结晶温度的影响.结果显示,随着稀土含量的增加,在相同退火条件下纯铜和BFe10-1-1铁白铜的再结晶程度均明显降低,表明其再结晶温度均有所提高.第二相粒子对位错的钉扎作用是再结晶温度提高的根本原因.

关 键 词:纯铜  BFe10-1-1铁白铜  稀土元素  再结晶温度

Influences of rare earth elements on recrystallization temperature of pure copper and BFe10-1-1 alloy
LIN Gao-yong,SUN Lio-ping,WEN Ji-you,WEI Bi,ZHANG Sheng-hua. Influences of rare earth elements on recrystallization temperature of pure copper and BFe10-1-1 alloy[J]. Heat Treatment of Metals, 2009, 34(2)
Authors:LIN Gao-yong  SUN Lio-ping  WEN Ji-you  WEI Bi  ZHANG Sheng-hua
Affiliation:1.School of Materials Science and Engineering;Central South University;Changsha Hu'nan 410083;China;2.Gaoxinzhangtong Limited Liability Company;Zhangjiagang Jiangsu 215600;China
Abstract:Different amount of rare earth(RE)elements were added to the pure copper and BFe10-1-1 alloy,and a series of samples were prepared after melting,casting,rolling and heat treating.The influences of rare earth(RE)elements on the recrystallization temperature of pure copper and BFe10-1-1 alloy were studied by analysis of microstructure and mechanical properties.The results show that with increasing additions of RE elements,the recrystallization degree of pure copper and BFe10-1-1 alloy at the same annealing co...
Keywords:
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号