| 铣削TC4钛合金的刀具磨损对比试验 |
| |
| 引用本文： | 张守全. 铣削TC4钛合金的刀具磨损对比试验[J]. 新技术新工艺, 2011, 0(9): 46-49 |
| |
| 作者姓名： | 张守全 |
| |
| 作者单位： | 厦门金鹭特种合金有限公司,福建厦门,361006 |
| |
| 摘 要： | TC4钛合金是典型难加工材料之一，极易造成工具磨损。本文通过铣削TC4钛合金试验，跟踪铣削过程中铣刀每个齿的磨损量及磨损形态，比较了不同细晶粒硬质合金铣刀的磨损过程。结果表明，铣刀切削刃发生崩刃会直接缩短铣刀的使用寿命。
|
| 关 键 词： | 钛合金 铣削 磨损 |
Comparison Test on the Wear of Milling Cutters in Machining of TC4 Titanium Alloys |
| |
| ZHANG Shouquan. Comparison Test on the Wear of Milling Cutters in Machining of TC4 Titanium Alloys[J]. New Technology & New Process, 2011, 0(9): 46-49 |
| |
| Authors: | ZHANG Shouquan |
| |
| Affiliation: | ZHANG Shouquan(Xiamen Golden Egret Special Alloy Co.,Ltd,Xiamen 361006,China) |
| |
| Abstract: | TC4 Titanium alloys are one of difficult-to-cut materials and can cause serious worn of cutting tools when machining them.In this paper,experiments of milling TC4 Titanium alloys with fine grain carbide milling cutters were carried out.Based on the wear condition of every cutting tooth on milling cutter inspected during testing,the wear progresses of cutters were compared and discussed.The results reveal that the failure of tipping will directly cut down the useful life of cutter. |
| |
| Keywords: | Titanium alloys Milling Wearing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
