热处理对16MnDR低温压力容器钢板组织和性能的影响 |
| |
引用本文: | 李文钱,马光亭,麻衡,王月香,吕晓峰. 热处理对16MnDR低温压力容器钢板组织和性能的影响[J]. 山东冶金, 2011, 0(5): 102-103,106 |
| |
作者姓名: | 李文钱 马光亭 麻衡 王月香 吕晓峰 |
| |
作者单位: | 莱芜钢铁集团有限公司技术中心; |
| |
摘 要: | 试验探讨了16MnDR低温压力容器钢的热处理工艺对力学性能和微观组织结构的影响。结果表明,对热轧状态的16MnDR低温压力容器钢进行热处理,可以细化晶粒和改善组织,提高综合力学性能。910℃正火及910℃正火+620℃回火处理均可以得到比较理想的低温韧性,金相组织为均匀的铁素体+珠光体,断口形貌以低温冲击韧性较好的等轴韧窝为主。
|
关 键 词: | 压力容器钢 16MnDR 热处理 低温韧性 金相组织 |
Influences of Heat Treatment on the Microstructure and Mechanical Properties of Low-temperature Pressure Vessel Steel 16MnDR |
| |
Affiliation: | LI Wen-qian,MA Guang-ting,MA Heng,WANG Yue-xiang,L Xiao-feng (The Technology Center of Laiwu Iron and Steel Group Corporation,Laiwu 271104,China) |
| |
Abstract: | Influences of heat treatment on the mechanical properties and microstructure of low-temperature pressure vessel steel 16MnDR were studied by test. The results showed that,for hot-rolled low-temperature steel 16MnDR,the heat treatment could improve the mechanical properties through fining the grain size and adjusting the microstructure. Excellent low-temperature toughness could be gained by normalizing at 910 ℃ or normalizing at 910 ℃ followed by tempering at 620 ℃. The metallographic structure was uniform ferrite and pearlite,and the fractures with better equiaxial dimples were also gotten. |
| |
Keywords: | pressure vessel steel 16MnDR heat treatment low-temperature toughness metallographic structure |
本文献已被 CNKI 维普 等数据库收录! |
|