| 粉末冶金材料激光焊接的气孔现象研究 |
| |
| 引用本文： | 周金鑫,唐霞辉,周毅,何艳艳,朱国富. 粉末冶金材料激光焊接的气孔现象研究[J]. 激光技术, 2003, 27(6): 503-505 |
| |
| 作者姓名： | 周金鑫 唐霞辉 周毅 何艳艳 朱国富 |
| |
| 作者单位： | 1.华中科技大学激光技术与工程研究院, 武汉, 430074 |
| |
| 基金项目： | 国家科技部“十五”攻关项目资助 |
| |
| 摘 要： | 焊接气孔是粉末冶金材料激光焊接的主要缺陷.简要分析了粉末冶金材料激光焊接中气孔的产生机理,着重研究了焊接速度与活性气体对气孔形成的影响关系.结果表明,在一定的激光功率下,提高焊接速度可减少金属蒸气的形成,从而降低气孔数;通过混合N2,O2作活性气体可改善熔化金属流动,防止气孔产生.
|
| 关 键 词： | 激光焊接 粉末冶金材料 活性气体 气孔缺陷 |
| 文章编号： | 1001-3806(2003)06-0503-03 |
| 收稿时间： | 2003-03-03 |
| 修稿时间： | 2003-03-03 |
Investigation of the porosity defect phenomenon during laser welding of powder metal material |
| |
| Zhou Jinxin,Tang Xiahui,Zhou Yi,He Yanyan,Zhu Guofu. Investigation of the porosity defect phenomenon during laser welding of powder metal material[J]. Laser Technology, 2003, 27(6): 503-505 |
| |
| Authors: | Zhou Jinxin Tang Xiahui Zhou Yi He Yanyan Zhu Guofu |
| |
| Abstract: | Welding porosity is the main defect during laser welding. In this paper we briefly analyze the mechanism of engendering pores in powder metal material(PM),and study the influence of welding speed and active gas for welding porosity defect. We find that the pore number will be reduced through depressing metallic vapour if welding speed is increased with constant laser power. Using N 2,O 2 as active gas,the fluidity of the melting metal can be improved,so blowholes may be avoided. |
| |
| Keywords: | laser welding powder metal material active gas porosity defect |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《激光技术》浏览原始摘要信息 |
|
点击此处可从《激光技术》下载全文 |
|
