| 低不饱和度聚醚多元醇伯羟基含量的提高 |
| |
| 引用本文： | 胡冰,黎松,陈成,杨秀全.低不饱和度聚醚多元醇伯羟基含量的提高[J].聚氨酯工业,2002,17(1):41-44. |
| |
| 作者姓名： | 胡冰 黎松 陈成 杨秀全 |
| |
| 作者单位： | 金陵石油化工公司研究院,南京,210046 |
| |
| 摘 要： | 首先采用自制的双金属氰化物络合催化剂，制备了低不饱和度、高相对分子质量聚氧化丙烯多元醇，然后与用传统碱催化制备的未经后处理的聚醚多元醇按一定比例混合，用环氧乙烷封端，经精制，得到高活性聚醚多元醇。所得聚醚二醇及聚醚三醇的不饱和度小于0.010mmol/g，伯羟基摩尔分数大于65%。
|
| 关 键 词： | 聚醚多元醇 低不饱和度 伯羟基 原料 聚氨酯泡沫塑料 |
| 修稿时间： | 2001年9月25日 |
Increase of Content of Primary Hydroxyl Groups of Polyether Polyols with Low Unsaturation |
| |
| Hu bing,Li Song,Chen Cheng,Yang Xiuquan.Increase of Content of Primary Hydroxyl Groups of Polyether Polyols with Low Unsaturation[J].Polyurethane Industry,2002,17(1):41-44. |
| |
| Authors: | Hu bing Li Song Chen Cheng Yang Xiuquan |
| |
| Abstract: | Polyether polyols with low unsaturation and high reactivity were prepared by steps of :(a)using multi active centers metal cyanide catalyst(MMC)to prepare polyoxypropylene polyols with low unsaturation and high molecular weight;(b)a polyol made by multi active centers metal cyanide(MMC)catalyst was blended with another polyol made by basic catalyst;(c)the polyol blend reacted with ethylene oxide to produce an ethylene oxide capped polyol.The unsaturation of the obtained polyether glycols and triols was less than 0.010 mmol/g,and the molar ratio of primary hydroxyl groups was over 65%. |
| |
| Keywords: | polyether polyol low unsaturation high molecular weight high reactivity primary hydroxyl group |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
