|
|||||
|
|
| 压电单晶悬臂梁的输出电压测试分析 | |
| 引用本文： | 王青萍,范跃农,王骐,姜胜林.压电单晶悬臂梁的输出电压测试分析[J].电子元件与材料,2011,30(8):12-15. |
| 作者姓名： | 王青萍 范跃农 王骐 姜胜林 |
| 作者单位： | 1. 湖北第二师范学院物理与电子信息学院,湖北武汉430205;华中科技大学电子科学与技术系教育部敏感陶瓷工程研究中心,湖北武汉430074 2. 景德镇陶瓷学院机电系,江西景德镇,333403 3. 湖北第二师范学院物理与电子信息学院,湖北武汉,430205 4. 华中科技大学电子科学与技术系教育部敏感陶瓷工程研究中心,湖北武汉,430074 |
| 基金项目： | 广东省教育部产学研结合资助项目(No.2010B090400447) |
| 摘 要： | 通过有限元分析软件ANSYS对压电单晶悬臂梁进行仿真分析,再经实验,研究了基板材质、粘结胶、激振力加速度和激振频率对输出电压的影响.结果表明,弹性模量较大的基板能提高输出电压,采用不导电胶比导电胶的输出电压大；压电悬臂梁对激振频率有很好的选择性,当频率为33 Hz时,输出电压为25.3 V；这有助于优化器件结构,设计出... |
| 关 键 词： | 压电单晶悬臂梁 能量收集器 有限元仿真 开路电压 |
Analysis and experiments on the output voltage of piezoelectric unimorph cantilever |
|
| WANG Qingping,FAN Yuenong,WANG Qi,JIANG Shenglin.Analysis and experiments on the output voltage of piezoelectric unimorph cantilever[J].Electronic Components & Materials,2011,30(8):12-15. | |
| Authors: | WANG Qingping FAN Yuenong WANG Qi JIANG Shenglin |
| Affiliation: | WANG Qingping1,2,FAN Yuenong3,WANG Qi1,JIANG Shenglin2(1.Physics & Electronics Department,Hubei University of Education,Wuhan 430205,China,2.Department of Electronic Science and Technology,Huazhong University of Science and Technology,Wuhan 430074,3.Department of Mechanism and Electronics,Jingdezhen Ceramic Institute,Jingdezhen 333403,Jiangxi Province,China) |
| Abstract: | The piezoelectric unimorph cantilever was simulated through the finite element analysis software ANSYS and experiments on it were taken out.The effects of the substrate materials,the glue,the acceleration and frequency of the exciting force on the output voltage were analyzed.The results show that the output voltage is improved by the substrate with larger elastic module,and the substrate with non-conductive glue can produce higher voltage than that with conductive.In addition,the piezoelectric cantilever h... |
| Keywords: | piezoelectric unimorph cantilever energy harvester finite element simulation open-circuit voltage |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
