| 渗锌碳钢在天然海水中的腐蚀行为 |
| |
| 引用本文： | 章强,刘贵昌,刘重阳,王立达,丁晨. 渗锌碳钢在天然海水中的腐蚀行为[J]. 材料保护, 2011, 44(5): 66-68,85 |
| |
| 作者姓名： | 章强 刘贵昌 刘重阳 王立达 丁晨 |
| |
| 作者单位： | 大连理工大学化工学院,辽宁,大连,116012 |
| |
| 摘 要： | 碳钢渗锌后耐蚀性提高.采用固体粉末包埋对20碳钢进行热扩散粉末渗锌,测试了渗锌层的硬度、形貌、成分及其在20,40,60℃天然海水中的电化学腐蚀行为.结果表明:碳钢渗锌层的硬度在313.7～347.5 HV,厚度在77.1～81.2μm,属于第4等级;渗锌层与碳钢基体结合紧密;随渗锌层厚度增加,Fe含量逐渐降低,Zn含...
|
| 关 键 词： | 渗锌碳钢 固体粉末包埋 天然海水 腐蚀 氧扩散控制 |
Corrosion Behavior of Sherardized Carbon Steel in Seawater |
| |
| ZHANG Qiang,LIU Gui-chang,LIU Chong-yang,WANG Li-da,DING Chen. Corrosion Behavior of Sherardized Carbon Steel in Seawater[J]. Journal of Materials Protection, 2011, 44(5): 66-68,85 |
| |
| Authors: | ZHANG Qiang LIU Gui-chang LIU Chong-yang WANG Li-da DING Chen |
| |
| Affiliation: | ZHANG Qiang,LIU Gui-chang,LIU Chong-yang,WANG Li-da,DING Chen(School of Chemical Engineering,Dalian University of Technology,Dalian 116012,China). |
| |
| Abstract: | Solid powder embedding method was used to make thermal diffusion sherardizing coating on 20 carbon steel.The hardness,morphology and composition of as-obtained sherardized coating were measured,and its electrochemical corrosion behavior in seawater of 20,40,60 ℃ was evaluated.Results show that as-obtained sherardized coating possesses a hardness of 313.7~347.5 HV and thickness of 77.1~81.2 μm.The sherardized coating had good adhesion to carbon steel substrate.The Fe content of the coating gradually decreased with increasing thickness,and its Zn content initially rose but then declined therewith.Besides,the corrosion of the sherardized carbon steel in seawater was dominated by oxygen diffusion at cathode.Corrosion products formed on the surface of the sherardized carbon steel in seawater of 60 ℃ resulted in reduced corrosion rate. |
| |
| Keywords: | sherardized carbon steel solid powder embedding natural seawater corrosion oxygen diffusion |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
