首页 | 官方网站   微博 | 高级检索  
     

过热度对轴承钢内部组织的影响
引用本文:逯志方,张治广,赵铮铮,王伟,李艳霞,和洪杰,王成杰.过热度对轴承钢内部组织的影响[J].北京科技大学学报,2016(Z1):45-49.
作者姓名:逯志方  张治广  赵铮铮  王伟  李艳霞  和洪杰  王成杰
作者单位:1. 邢台钢铁有限责任公司,邢台054027; 河北省线材工程技术研究中心,邢台054027;2. 邢台钢铁有限责任公司,邢台,054027
摘    要:利用枝晶腐蚀低倍检验技术、铸坯及盘条淬火+回火热处理金相检验等技术研究了过热度对轴承钢内部组织的影响。结果表明低过热度工艺铸坯等轴晶比例提高,二次枝晶间距变小,铸坯内部偏析、缩孔等冶金缺陷有所改善,但盘条酸洗低倍组织及碳化物不均匀性差别不大。两种工艺铸坯混晶区均比中心等轴晶区偏析严重,存在大量的大尺寸共晶碳化物。

关 键 词:轴承钢  过热度  凝固组织  枝晶间距

Influence of superheat on internal structure of the bearing steel
LU Zhi-fang,ZHANG Zhi-guang,ZHAO Zheng-zheng,WANG Wei,LI Yan-xia,HE Hong-jie,WANG Cheng-jie.Influence of superheat on internal structure of the bearing steel[J].Journal of University of Science and Technology Beijing,2016(Z1):45-49.
Authors:LU Zhi-fang  ZHANG Zhi-guang  ZHAO Zheng-zheng  WANG Wei  LI Yan-xia  HE Hong-jie  WANG Cheng-jie
Abstract:The influence of superheat on internal structure of the bearing steel is researched by the macrostructure inspection tech-nology of dendrite corrosion and metallographic test method of bloom and wire with quenching and tempering heat treatment. The re-sults show that the equiaxed crystal ratio of the low superheat process increase. The secondary dendrite spacing decreases. Internal metallurgical defects such as segregation, shrinkage cavity improve. But there is little difference in the wire rod pickling macrostructure and carbide nonhomogeneity. Segregation control in the mixed crystal area is more serious than that in equiaxed crystal area. And there are a large numble of large size eutectic carbides.
Keywords:bearing steel  superheat  solidification structure  dendrite arm spacing
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号