|
|||||
|
|
| 铝热-离心法制备的铁镍基耐蚀合金的显微结构 | |
| 引用本文： | 席文君,周和平,殷声,赖和怡.铝热-离心法制备的铁镍基耐蚀合金的显微结构[J].复合材料学报,2003,20(4):10-13. |
| 作者姓名： | 席文君 周和平 殷声 赖和怡 |
| 作者单位： | 1. 清华大学,材料科学与工程系;北京科技大学,材料科学与工程学院 2. 清华大学,材料科学与工程系 3. 北京科技大学,材料科学与工程学院 |
| 摘 要： | 研究了铝热-离心法制备的铁镍基合金内衬复合钢管的显微结构,分析了内衬层沿径向的成分分布。结果表明,铁镍合金内衬层与碳钢基体之间形成了一个宽约20μm的马氏体过渡区。内衬层合金元素的含量沿径向由内表面到外表面逐渐降低。铁镍合金铁素体区内有细小的AlNi3和AlNi析出物。 |
| 关 键 词： | 复合钢管 铁镍基合金 燃烧合成 铝热-离心法 |
| 文章编号： | 1000-3851(2003)04-0010-04 |
| 收稿时间： | 2002-01-14 |
| 修稿时间： | 2002年1月14日 |
MICROSTRUCTURE OF IRON-NICKEL ALLOY PRODUCED BY CENTRIFUGAL-SHS PROCESS |
|
| XI Wenjun,ZHOU Heping,YIN Sheng,LAI Heyi.MICROSTRUCTURE OF IRON-NICKEL ALLOY PRODUCED BY CENTRIFUGAL-SHS PROCESS[J].Acta Materiae Compositae Sinica,2003,20(4):10-13. | |
| Authors: | XI Wenjun ZHOU Heping YIN Sheng LAI Heyi |
| Affiliation: | 1. Department of Materials Science and Engineering, Tsinghua University, Beijing 100084,China; 2. School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China |
| Abstract: | The microstructure and composition distribution of the iron-nickel alloy lined layer in a composite steel pipe produced by centrifugal-SHS process were investigated. The results showed that a martensitic transition region has been found between the iron-nickel layer and carbon steel matrix. A composition gradient of alloying elements exists in the iron-nickel alloy layer in the radial direction of the composite pipe. The alloying element contents in the lined layer are higher near the inner surface than near the outside surface. The intermetallic compounds AlNi3 and AlNi precipitate in the iron-nickel alloy. |
| Keywords: | composite pipe iron-nickel alloy combustion synthesis centrifugal-thermit process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
| 点击此处可从《复合材料学报》浏览原始摘要信息 | |
| 点击此处可从《复合材料学报》下载全文 | |
