| 搅拌摩擦焊接热输入数值模型 |
| |
| 引用本文： | 王大勇,冯吉才,王攀峰. 搅拌摩擦焊接热输入数值模型[J]. 焊接学报, 2005, 26(3): 25-28,32 |
| |
| 作者姓名： | 王大勇 冯吉才 王攀峰 |
| |
| 作者单位： | 哈尔滨工业大学,现代焊接生产技术国家重点实验室,哈尔滨,150001;哈尔滨工业大学,现代焊接生产技术国家重点实验室,哈尔滨,150001;哈尔滨工业大学,现代焊接生产技术国家重点实验室,哈尔滨,150001 |
| |
| 基金项目： | 国家863基金资助项目(20002AA724040) |
| |
| 摘 要： | 根据搅拌摩擦焊接特点，建立了轴肩、柱形搅拌针和锥形搅拌针热输入数值模型，并分别讨论了搅拌针锥角对轴肩和锥形搅拌针热输入的影响。结果表明，锥角增大，轴肩热输入降低；锥形搅拌针侧面热输入增大；搅拌针端面热输入降低；搅拌针总的热输入先下降，然后迅速上升。
|
| 关 键 词： | 搅拌摩擦焊 热输入 数值模型 |
| 文章编号： | 0253-360X(2005)03-25-05 |
| 收稿时间： | 2004-04-23 |
Numerical model of heat input from rotational tool during friction stir welding |
| |
| WANG Da-yong,FENG Ji-cai and WANG Pan-feng. Numerical model of heat input from rotational tool during friction stir welding[J]. Transactions of The China Welding Institution, 2005, 26(3): 25-28,32 |
| |
| Authors: | WANG Da-yong FENG Ji-cai WANG Pan-feng |
| |
| Affiliation: | National Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China,National Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China and National Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China |
| |
| Abstract: | This paper has established the numerical models of the heat generation from the shoulder, the cylinder shape and the cone shape pins (including pin sideface and endface) during friction stir welding. The effect of pin angle on the heat generation from the cone shape pin has been analyzed. The results confirm that the heat generation from the shoulder and the cone shape pin endface decreases, and the heat generation from the cone shape pin sideface increases when pin angle increases. However, the general heat generation from the cone shape pin decreases firstly, then increases rapidly, with pin angle increasing. |
| |
| Keywords: | friction stir welding heat input numerical model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
