首页 | 官方网站   微博 | 高级检索  
     

湿法稀磷酸预处理实验研究
引用本文:何宾宾,张 晖,周琼波,方世祥,傅 英. 湿法稀磷酸预处理实验研究[J]. 无机盐工业, 2016, 48(8): 55
作者姓名:何宾宾  张 晖  周琼波  方世祥  傅 英
作者单位:1.云天化集团云南磷化集团有限公司,云南昆明 650600;2.国家磷资源开发利用工程技术研究中心
摘    要:针对湿法磷酸生产过程中浓磷酸脱重(脱重金属)后过滤难等问题,提出陈化稀磷酸脱重-过滤-浓缩-脱氟-后续产品工艺。实验结果表明,当硫化钠加入量为计算量的11倍、反应温度为50 ℃、反应时间为30 min、搅拌速度为400 r/min时,脱重清酸中As的质量分数为7×10-6~8×10-6,达到1.0×10-5以下要求。

关 键 词:湿法磷酸  重金属  硫化钠  

Experimental study on pretreatment of dilute wet process phosphoric acid
HE Bin-Bin,ZHANG Hui,ZHOU Qiong-Bo,FANG Shi-Xiang,FU Ying. Experimental study on pretreatment of dilute wet process phosphoric acid[J]. Inorganic Chemicals Industry, 2016, 48(8): 55
Authors:HE Bin-Bin  ZHANG Hui  ZHOU Qiong-Bo  FANG Shi-Xiang  FU Ying
Affiliation:1.Yunnan Phosphate Chemical Group Co.Ltd,Kunming 650600,China;2.National EngineeringResearch Center of phosphate Research Development and Utilization
Abstract:In allusion to the problems,such as the hard filtration of heavy metal-removed concentrated phosphoric acid in the process of wet process phosphoric acid production,the new technology‘Aged dilute phosphoric acid heavy metal removal-fil-tration-concentration-defluorination-subsequent product process’ was put forward.Results showed,when sodium sulfide dosage was 11 times of the calculation amount of computation,reaction temperature of 50 ℃,the reaction time of 30 min,and stirring speed of 400 r/min,the arsenic′s mass fraction in the clear heavy metal-removed acid was 7×10-6~8×10-6,met the re-quirement of below the 1.0×10-5.
Keywords:wet process phosphoric acid  heavy metals  sodium sulfide  
点击此处可从《无机盐工业》浏览原始摘要信息
点击此处可从《无机盐工业》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号