| 基于ANSYS／LS—DYNA非均匀壁厚管料弯折成形仿真 |
| |
| 引用本文： | 牟淑志,杜春江. 基于ANSYS／LS—DYNA非均匀壁厚管料弯折成形仿真[J]. 机械工程师, 2011, 0(3): 102-103 |
| |
| 作者姓名： | 牟淑志 杜春江 |
| |
| 作者单位： | 1. 金陵科技学院,机电学院,南京,211169
2. 南京电子技术研究所,南京,210039 |
| |
| 摘 要： | 基于著名的通用显式有限元分析软件ANSYS／LS—DYNA，对某大型发电设备转子线圈使用的非均匀大壁厚铜银合金管料的弯折成形及回弹进行了仿真分析，探讨了相关参数对仿真计算的影响，对仿真和试验进行了对比，结果表明，采用仿真分析方法能够快速有效的再现管料的弯折过程。
|
| 关 键 词： | 弯折成形 仿真 回弹 |
Bend Forming Simulation of Non-uniform Pipe Based on ANSYS/LS-DYNA |
| |
| MU Shu-zhi,DU Chun-jiang. Bend Forming Simulation of Non-uniform Pipe Based on ANSYS/LS-DYNA[J]. Mechanical Engineer, 2011, 0(3): 102-103 |
| |
| Authors: | MU Shu-zhi DU Chun-jiang |
| |
| Affiliation: | ( l.School of Mechanical ＆ Eleetronical Engineering, Jinling Institute of Technology, Nanjing 211169,.China： 2. China Nanjing Research Institute of Electronics Technology, Nanjing 210039,China) |
| |
| Abstract: | Bend forming and springback simulation of non-uniform pipe used in large-scale power equipment is carried out. With the famous universal explicit finite element analysis software ANSYS/LS-DYNA, parameters affecting the simulation are discussed, and experiment is carried out. Result shows that simulation method can reappear forming process of the pipe quickly and effectively. |
| |
| Keywords: | bend forming simulation springbaek |
| 本文献已被 维普 万方数据 等数据库收录！ |
