| 轴流泵叶轮进出口流场的测量 |
| |
| 引用本文： | 张德胜,施卫东,关醒凡,曹卫东,冷洪飞. 轴流泵叶轮进出口流场的测量[J]. 排灌机械, 2009, 27(4): 210-214 |
| |
| 作者姓名： | 张德胜 施卫东 关醒凡 曹卫东 冷洪飞 |
| |
| 作者单位： | 江苏大学,流体机械工程技术研究中心,江苏,镇江,212013 |
| |
| 基金项目： | 国家863计划项目，江苏省研究生创新计划基金资助项目 |
| |
| 摘 要： | 为了获得轴流泵内部流动的真实情况,设计了内部流动测量装置.运用五孔球形探针,对高效轴流泵在0.8Qopt,1.0Qopt和1.2Qopt工况下的叶轮进口和出口速度矢量分布、静压分布和总压分布进行了测量,并分析了不同工况下的轴面速度、环量、圆周方向分速度和压力分布等.测量结果表明：轴流泵模型进口在0.8Qopt至1.2Qopt工况范围内,流动稳定,进口轴向速度从轮毂到轮缘逐渐减小,且进口预旋很小,不同径向位置的静压基本相等.在最优工况下,轮毂与可调叶片间无间隙时,轴流泵叶轮出口基本呈现等环量流型,轴面速度呈现抛物线分布,且效率高.若轮毂侧存在间隙,间隙处的环量、轴面速度、压力和效率均明显下降.
|
| 关 键 词： | 轴流泵 叶轮 流动测量 多工况 五孔探针 |
Measurement on flow field at inlet and outlet of axial-flow pump impeller |
| |
| Zhang Desheng,Shi Weidong,Guan Xingfan,Cao Weidong,Leng Hongfei. Measurement on flow field at inlet and outlet of axial-flow pump impeller[J]. Drainage and Irrigation Machinery, 2009, 27(4): 210-214 |
| |
| Authors: | Zhang Desheng Shi Weidong Guan Xingfan Cao Weidong Leng Hongfei |
| |
| Affiliation: | Technical and Research Center of Fluid Machinery Engineering;Jiangsu University;Zhenjiang;Jiangsu 212013;China |
| |
| Abstract: | In order to obtain the flow structure in high efficiency axial-flow pump impeller,the measurement device was designed.Five-hole spherical probe was used to measure the velocity at inlet and outlet of axial-flow impeller at the conditions of 0.8Qopt,1.0Qopt and 1.2Qopt.The distributions of velocity vector,static pressure and total pressure were measured.Meridional velocity,circulation and velocity in circumferential direction were analyzed.Measurement results show that the flow in axial-flow pump inlet is st... |
| |
| Keywords: | axial-flow pump impeller flow measurement multi-conditions five-hole probe |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
