| 人工椎间盘生物摩擦学研究进展:脊柱模拟试验机方法 |
| |
| 引用本文： | 王松,廖振华,刘宇宏,刘伟强,温诗铸.人工椎间盘生物摩擦学研究进展:脊柱模拟试验机方法[J].摩擦学学报,2013,33(2):202-208. |
| |
| 作者姓名： | 王松 廖振华 刘宇宏 刘伟强 温诗铸 |
| |
| 作者单位： | 1. 清华大学 精密仪器与机械学系,北京 100084;2. 深圳清华大学研究院 生物医用材料及植入器械重点实验室,广东 深圳 518057;深圳清华大学研究院 生物医用材料及植入器械重点实验室,广东 深圳 518057;1. 清华大学 精密仪器与机械学系,北京 100084;2. 清华大学 摩擦学国家重点实验室,北京 100084;1. 清华大学 精密仪器与机械学系,北京 100084;2. 深圳清华大学研究院 生物医用材料及植入器械重点实验室,广东 深圳 518057;1. 清华大学 精密仪器与机械学系,北京 100084;2. 清华大学 摩擦学国家重点实验室,北京 100084 |
| |
| 基金项目： | 国家科技支撑计划课题《新型人工椎间盘》(2012BAI18B05)和清华大学自主科研项目(20121088060)资助. |
| |
| 摘 要： | 人工椎间盘生物摩擦学性能评估有多种研究方法,其中使用脊柱模拟试验机是评估椎间盘假体中长期磨损性能的主要手段.本文整理了近年来使用脊柱模拟试验机进行椎间盘假体磨损性能评估的研究文献,介绍了现有脊柱模拟试验机种类和研究方法以及相关试验标准;分析了近年来针对影响假体磨损性能主要因素(假体结构设计、关节材料、材料表面处理、载荷/运动/频率、润滑液、磨损时间等)所取得的研究进展;综述了主要颈腰椎人工椎间盘假体的磨损性能.
|
| 关 键 词： | 人工椎间盘 生物摩擦学 脊柱模拟试验机 综述 |
Research Progress on Biotribological Studies in Artificial Disc Prosthesis: The Method by Using Spinal Simulators |
| |
| WANG Song,LIAO Zhen-hu,LIU Yu-hong,LIU Wei-qiang and WEN Shi-zhu.Research Progress on Biotribological Studies in Artificial Disc Prosthesis: The Method by Using Spinal Simulators[J].Tribology,2013,33(2):202-208. |
| |
| Authors: | WANG Song LIAO Zhen-hu LIU Yu-hong LIU Wei-qiang and WEN Shi-zhu |
| |
| Affiliation: | 1. Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China;2. Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057, China;Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057, China;1. Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China;2. State Key Laboratory of Tribology, Tsinghua University, Beijing 100084, China;1. Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China;2. Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057, China;1. Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China;2. State Key Laboratory of Tribology, Tsinghua University, Beijing 100084, China |
| |
| Abstract: | A lot of methods have been used for evaluation on biotribological performance in artificial disc,one of them is the application of spinal simulators,which has been widely used to study the medium and long-term wear performance of disc prosthesis.This review showed the current literatures regarding to the study about the wear performance in disc prosthesis by using spinal simulators, introduced the types of spinal simulators, research methods as well as relative test standards. In particular, it also presented the updated information about the research progress on effect factors of wear performance in disc prosthesis (structural design, materials for joint prosthesis, surface treatment, load/motion/frequency, lubricating liquid, wear time, etc.), and summarized some research results about wear performance in cervical/lumbar artificial disc prosthesis. |
| |
| Keywords: | artificial disc biotribology spinal simulator review |
|
| 点击此处可从《摩擦学学报》浏览原始摘要信息 |
|
点击此处可从《摩擦学学报》下载全文 |
|
