| 冷轧薄钢板拉伸试样尺寸对断后伸长率和最大力总伸长率影响的对比 |
| |
| 引用本文： | 罗五四. 冷轧薄钢板拉伸试样尺寸对断后伸长率和最大力总伸长率影响的对比[J]. 理化检验(物理分册), 2011, 0(8): 469-475 |
| |
| 作者姓名： | 罗五四 |
| |
| 作者单位： | 东风汽车有限公司东风商用车技术中心; |
| |
| 摘 要： | 为了解决国内外冷轧薄钢板拉伸试验标准不统一,断后伸长率（A）受试样标距影响,没有直接可比性及换算的局限性,同时也为了满足车身设计人员提出的同一冲压级别的汽车板应采用同一种标准的伸长率表征力学性能的要求,采用大量试验验证了最大力总伸长率（Agt）与试样标距无关。并根据拉伸试验机已能自动测出Agt的现状,提出应将其列入汽车板标准力学性能表中。
|
| 关 键 词： | 拉伸试验 标准 原始标距 断后伸长率 最大力总伸长率 |
Comparison of Effect of Tensile Specimens Size on Percentage Elongation after Fracture and Percentage Total Elongation at Maximum Force of Cold-Rolled Steel Sheets |
| |
| LUO Wu-si. Comparison of Effect of Tensile Specimens Size on Percentage Elongation after Fracture and Percentage Total Elongation at Maximum Force of Cold-Rolled Steel Sheets[J]. Physical Testing and Chemical Analysis Part A:Physical Testing, 2011, 0(8): 469-475 |
| |
| Authors: | LUO Wu-si |
| |
| Affiliation: | LUO Wu-si (Dongfeng Commercial Vehicle Technical Center of DFL,Shiyan 442001,China) |
| |
| Abstract: | To solve problems of the cold-rolled steel sheets such as the tensile testing standards are not unified in the international,the percentage elongation after fracture(A) is affected by the specimen gauge length creating no direct comparability and conversion limitations,also to meet the requests that the automobile steel sheets of the same stamping level should adopt the percentage elongation of the same standard reflecting mechanical properties proposed by automobile body designers,this article proved that ... |
| |
| Keywords: | tensile testing standard original gauge length percentage elongation after fracture percentage total elongation at maximum force |
| 本文献已被 CNKI 维普 等数据库收录！ |
