| 锐钛矿型TiO_2溶胶原位改性醋丙乳液的研究 |
| |
| 引用本文： | 宗建娟,申乾宏,项振茂,黎胜,周箭.锐钛矿型TiO_2溶胶原位改性醋丙乳液的研究[J].稀有金属材料与工程,2010(Z2). |
| |
| 作者姓名： | 宗建娟 申乾宏 项振茂 黎胜 周箭 |
| |
| 作者单位： | 浙江大学;浙江加州国际纳米技术研究院;浙江警察学院; |
| |
| 基金项目： | 国家科技支撑计划(2006BAJ05B05); 浙江省科技计划(2007C21110) |
| |
| 摘 要： | 采用TiOSO4为原料制备稳定的锐钛矿型TiO2溶胶,将其与醋丙乳液复合,原位合成含有锐钛矿型TiO2晶粒的复合乳液,并采用浸渍提拉法制备薄膜。分别采用XRD、TEM、SEM等测试手段对TiO2溶胶的物相结构、复合乳液中粒子的大小和形态、薄膜表面形貌等进行表征,并考察TiO2溶胶添加量对薄膜表面形貌、接触角以及光催化性能的影响。结果表明:该复合乳液具有较高的稳定性和良好的成膜特性,TiO2粒子在复合薄膜中分布均匀,随TiO2含量的增大,薄膜表面的TiO2粒子增多,导致薄膜粗糙度增大。经紫外光照后,复合薄膜对水的接触角随TiO2含量的增大而降低,光催化活性逐步提高。
|
| 关 键 词： | 二氧化钛 锐钛矿 醋丙乳液 薄膜 光催化 |
Study on in-situ Modification of Vinyl Acetate-Acrylate Latex by Anatase TiO_2 Sol |
| |
| Zong Jianjuan,Shen Qianhong,Xiang Zhenmao,Li Sheng,Zhou Jian.Study on in-situ Modification of Vinyl Acetate-Acrylate Latex by Anatase TiO_2 Sol[J].Rare Metal Materials and Engineering,2010(Z2). |
| |
| Authors: | Zong Jianjuan Shen Qianhong Xiang Zhenmao Li Sheng Zhou Jian |
| |
| Affiliation: | Zong Jianjuan1,Shen Qianhong1,2,Xiang Zhenmao3,Li Sheng1,Zhou Jian1 (1. Zhejiang University,Hangzhou 310027,China) (2. Zhejiang California International NanoSystems Institute,China) (3. Zhejiang Police College,Hangzhou 310053,China) |
| |
| Abstract: | With TiOSO4 as raw materials stable anatase TiO2 sol was prepared. The sol was prepared was added into vinyl acetate-acrylate latex, to in-situ the composite emulsion containing nano crystalline TiO2. The film was prepared by a dip-coating method from the above emulsion. XRD, TEM and SEM were adopted to characterize the phase structure of TiO2 sol, the size and shape of particles in the composite emulsion and the surface morphology of the film. The effect of TiO2 addition amount on the contact angle, surfac... |
| |
| Keywords: | TiO2 anatase vinyl acetate-acrylate latex film photocatalysis |
| 本文献已被 CNKI 等数据库收录！ |
|
