| Affiliation: | (1) Department of Metallurgy, Saveh-Branch, Islamic Azad University, Saveh, Iran;(2) Department of Materials Science and Engineering, Sharif University of Technology, Azadi Avenue, Tehran, Iran;(3) Department of Mechanical and Aerospace Engineering, Science and Research-Branch, Islamic Azad University, Tehran, Iran;(4) KNT University, Tehran, Iran |
| Abstract: | In this study, a set of constitutive equation corrected for deformation heating is proposed for a near equi-atomic NiTi shape memory alloy using isothermal hot compression tests in temperature range of 700 to 1000 °C and strain rate of 0.001 to 1 s−1. In order to determine the temperature rise due to deformation heating, Abaqus simulation was employed and varied thermal properties were considered in the simulation. The results of hot compression tests showed that at low pre-set temperatures and high strain rates the flow curves exhibit a softening, while after correction of deformation heating the softening is vanished. Using the corrected flow curves, the power-law constitutive equation of the alloy was established and the variation of constitutive constants with strain was determined. Moreover, it was found that deformation heating introduces an average relative error of about 9.5% at temperature of 800 °C and strain rate of 0.1 s−1. The very good agreement between the fitted flow stress (by constitutive equation) and the measured ones indicates the accuracy of the constitutive equation in analyzing the hot deformation behavior of equi-atomic NiTi alloy. |
