| EAF-LF (VD) -HCC流程生产钻杆管用钢26CrMoNbTiB的洁净度 |
| |
| 引用本文： | 刘剑辉,朱荣,易操,肖鸿光,彭自胜,钟春生,孙群保.EAF-LF (VD) -HCC流程生产钻杆管用钢26CrMoNbTiB的洁净度[J].特殊钢,2010,31(1):40-42. |
| |
| 作者姓名： | 刘剑辉 朱荣 易操 肖鸿光 彭自胜 钟春生 孙群保 |
| |
| 作者单位： | 1北京科技大学冶金与生态工程学院，北京100083；
2湖南衡阳钢管(集团)有限公司，衡阳421001 |
| |
| 摘 要： | 26CrMoNbTiB钢由45 t EAF-LF(VD)-Φ80～180mm管坯HCC流程冶炼。该钢各工序的洁净度试验结果表明,LF-VD后钢中氧含量为(8～18)×10-6,平均夹杂物数量最低为2.31个/mm2,连铸坯平均夹杂物数量为3.66个/mm2,≥50μm大型夹杂物平均含量为4.08 mg/10 kg。加强钢包到中间包长水口的密封保护和采用钢包下渣检测装置,提高中间包容量和采用挡渣墙是进一步提高铸坯洁净度的关键工艺措施。
|
| 关 键 词： | 钻杆管用钢26CrMoNbTiB EAF-LF(VD)-HCC 洁净度 |
| 收稿时间： | 2009-08-03 |
Cleanliness of Steel 26CrMoNbTiB for Drill Pipe Produced by EAF-LF(VD)-HCC Flow Sheet |
| |
| Liu Jianhui,Zhu Rong,Yi Cao,Xiao Hongguang,Peng Zisheng,Zhong Cunsheng,Sun Qunbao.Cleanliness of Steel 26CrMoNbTiB for Drill Pipe Produced by EAF-LF(VD)-HCC Flow Sheet[J].Special Steel,2010,31(1):40-42. |
| |
| Authors: | Liu Jianhui Zhu Rong Yi Cao Xiao Hongguang Peng Zisheng Zhong Cunsheng Sun Qunbao |
| |
| Affiliation: | 1 Metallurgical and Ecological Engineering School, University of Science and Technology, Beijing 100083 ；
2 Hunan Hengyang Steel Tube ( Group) Co Ltd, Hengyang 421001 |
| |
| Abstract: | Steel 26CrMoNbTiB is melted by 45 t EAF-LF ( VD) -Φ80 ?180 mm tube billet HCC flow sheet. Test results of cleanliness of the steel at each melting process showed that the oxygen content in steel after LF-VD is (8 ~ 18) x 10 -6 with lowest average inclusion amount i. e. 2. 31 inclusions/mm2 and that is 3. 66 inclusions/mm2 in casting billet and the average content of ≥50μm micro inclusions in billet is 4. 08 mg/10 kg. To tighten the sealed shield of long nozzle from ladle to tundish, use monitoring instrument for ladle slagging out, increase tundish capacity and use dam in tundish are the key process measures to further improve cleanliness of billet。 |
| |
| Keywords: | 26CrMoNbTiB EAF-LF(VD)-HCC |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
