| 基于PLC与步进电机的装载机先导手柄阀测控系统开发 |
| |
| 引用本文： | 缪正成,倪晓春,金侠杰,王明虎.基于PLC与步进电机的装载机先导手柄阀测控系统开发[J].机床与液压,2017,45(8):159-162. |
| |
| 作者姓名： | 缪正成 倪晓春 金侠杰 王明虎 |
| |
| 作者单位： | 1. 上海大学机电工程与自动化学院,上海,200072;2. 宁波弗莱格液压有限公司,浙江宁波,315000 |
| |
| 摘 要： | 针对装载机先导手柄阀性能测试要求,开发了采用PLC与步进电机控制的测试工装,介绍该测试工装的结构、工作原理和控制要求。在此基础上,对其进行PLC和LabVIEW软件开发。实际应用表明:该测控系统可满足先导手柄阀测试要求,且系统运行良好、试验效率高、数据采集及处理可靠有效,可为产品出厂测试、设计及维护提供实验支持。
|
| 关 键 词： | 先导手柄阀 测控系统 PLC 步进电机 LabVIEW |
Development of Test and Control System for the Wheel Loader Pilot Valve Based on PLC and Step Motor |
| |
| MIAO Zhengcheng,NI Xiaochun,JIN XiaJie,WANG Minghu.Development of Test and Control System for the Wheel Loader Pilot Valve Based on PLC and Step Motor[J].Machine Tool & Hydraulics,2017,45(8):159-162. |
| |
| Authors: | MIAO Zhengcheng NI Xiaochun JIN XiaJie WANG Minghu |
| |
| Abstract: | According to the test requirements of the wheel loader pilot valve,the assembly test controlled by PLC and step motor was developed.The structure,working principle and control requirements of the assembly test were introduced.On this basis,the software developments of PLC and LabVIEW were carried out.The actual application shows that the control system can meet the test requirements of pilot valve,and the system runs well,the test efficiency is high,the data acquisition and processing is reliable and effective.It provides experimental support for test,design and maintenance of product leaving factory. |
| |
| Keywords: | Pilot valve Test and control system PLC Stepper motor LabVIEW |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
