|
|||||
|
|
| 28Cr2Mo钢铸坯轧制断裂原因分析 | |
| 引用本文： | 付勇涛,刘静,刘武群,陈玮,严翔.28Cr2Mo钢铸坯轧制断裂原因分析[J].钢铁研究,2009,37(4). |
| 作者姓名： | 付勇涛 刘静 刘武群 陈玮 严翔 |
| 作者单位： | 1. 武汉钢铁(集团)公司,研究院,湖北,武汉,430080;武汉科技大学,材料与冶金学院,湖北,武汉,430081 2. 武汉科技大学,材料与冶金学院,湖北,武汉,430081 3. 武汉钢铁(集团)公司,研究院,湖北,武汉,430080 |
| 摘 要： | 对轧制28Cr2Mo钢过程中出现断坯的裂纹部位进行了夹杂、脱碳层及组织分析,并采用瑞典Thermocalc软件对28Cr2Mo钢热力学性质进行了计算.研究表明28Cr2Mo钢在炉时间不足,加热过程中铸坯上下表面存在温差,导致Cr、C等元素不能充分溶解,使得钢坯在轧制时塑性较差,最终导致了铸坯裂纹出现. |
| 关 键 词： | 断坯 脱碳层 加热 |
Analysis of fracture of 28Cr2Mo steel slab during rolling process |
|
| FU Yong-tao,LIU Jing,LIU Wu-qun,CHEN Wei,YAN Xiang.Analysis of fracture of 28Cr2Mo steel slab during rolling process[J].Research on Iron and Steel,2009,37(4). | |
| Authors: | FU Yong-tao LIU Jing LIU Wu-qun CHEN Wei YAN Xiang |
| Affiliation: | 1.Research and Development Center of WISCO;Wuhan 430080;China;2.College of Materials Science and Metallurgical Engineering;Wuhan University of Science and Technology;Wuhan 430081;China |
| Abstract: | The fracture of 28Cr2Mo slab during rolling process was studied by determining impurities and microstructure and decarburization layer.The thermodynamic state of 28Cr2Mo steel was evaluated by Thermocalc/DICTRA software.The results showed that the shortage of heating time and the temperature difference between upper and lower surface of slab resulted in insufficient dissolution of Cr and C,which decreased the ductility of slab during rolling and finally caused the fracture of slab. |
| Keywords: | fracture of steel slab decarburization layer reheating |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
