| 金属树脂复合模具材料的研究 |
| |
| 引用本文： | 杨光,周云光,张永弟,岳彦芳.金属树脂复合模具材料的研究[J].兵器材料科学与工程,2012,35(4):60-62. |
| |
| 作者姓名： | 杨光 周云光 张永弟 岳彦芳 |
| |
| 作者单位： | 河北科技大学机械电子工程学院,河北石家庄,050018;河北科技大学机械电子工程学院,河北石家庄,050018;河北科技大学机械电子工程学院,河北石家庄,050018;河北科技大学机械电子工程学院,河北石家庄,050018 |
| |
| 基金项目： | 机械制造系统工程国家重点实验室开放课题 |
| |
| 摘 要： | 为获得性能较好的金属树脂快速模具材料,通过3因素3水平正交实验研究了固化剂、稀释剂和石英粉用量对快速模具材料抗拉强度、抗弯强度和硬度的影响。对材料力学特性数据的极差分析得出:以E-44环氧树脂为基料、铝粉、玻璃纤维等为填料的金属树脂快速模具材料的较优配方;当固化剂为16.5 g、稀释剂为25 mL、石英粉为15 g,该组快速模具材料的综合性能最佳。
|
| 关 键 词： | 快速模具 金属树脂模具 材料配方 性能分析 |
Composite tooling material of metal resin |
| |
| YANG Guang
,
ZHOU Yunguang
,
ZHANG Yongdi
,
YUE Yanfang.Composite tooling material of metal resin[J].Ordnance Material Science and Engineering,2012,35(4):60-62. |
| |
| Authors: | YANG Guang ZHOU Yunguang ZHANG Yongdi YUE Yanfang |
| |
| Affiliation: | (School of Mechanical & Electrical Engineering,Hebei University of Science & Technology,Shijiazhuang 050018,China) |
| |
| Abstract: | In order to obtain better mechanical performance of rapid tooling material,The effects of some factors,such as the mass proportion of cure agent,diluents and quartz powder,on the tensile strength,bending strength and hardness of the cured materials were investigated by three-factor,three-level orthogonal experiment.Through the range analysis of experimental result,better metal resin rapid tooling materials,which are based on E-44 epoxy resin and filled by aluminite powder,short cut glass fiber,etc.were obtained.When the dosage of cure agent diluent and quartz powder is 16.5 g,25 mL,and 15 g,respectively,the performance of metal resin rapid tooling material reach the optimum comprehensive properties. |
| |
| Keywords: | rapid tooling metal resin mold material formula performance analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
