首页 | 官方网站   微博 | 高级检索  
     

适用于LED阵列光源的新型双层TIR透镜设计
引用本文:韩 敏,叶正南,施悦强,丁桂林.适用于LED阵列光源的新型双层TIR透镜设计[J].电子科技,2017,30(4):128.
作者姓名:韩 敏  叶正南  施悦强  丁桂林
作者单位:(1. 江苏大学 机械工程学院,江苏 镇江 212013;2. 深圳市鑫希叶光电有限公司,广东 深圳 518000)
摘    要:针对贴片LED阵列光源,文中提出了一种新型双层全内反射透镜结构,并利用LightTools -SolidWorks桥对其进行设计与优化,光斑的芯片成像与黄斑问题得到了解决。透镜最大外径为40 mm,透镜总高为12 mm,实现了照明系统的紧凑小型化,实际的软件模拟和测量结果表明,透镜匹配3×3阵列的贴片3030LED光源后,光学效率高达85%以上,光斑均匀,无明显黄斑现象。此款透镜被用于实际射灯灯具中。

关 键 词:照明设计  LED阵列光源  双层透镜  黄斑问题  芯片成像  

Research and Design of Novel Double-layer TIR Lens for LED Source Array
HAN Min,YE Zhengnan,SHI Yueqiang,DING Guilin.Research and Design of Novel Double-layer TIR Lens for LED Source Array[J].Electronic Science and Technology,2017,30(4):128.
Authors:HAN Min  YE Zhengnan  SHI Yueqiang  DING Guilin
Affiliation:(1. School of Mechanical Engineering, Jiangsu University, Zhenjiang 212000, China; 2. Shenzhen Xinxiye Photoelectric Co.,Ltd.,Shenzhen 518000, China)
Abstract:A novel LED double-layer TIR(Total Internal Reflection) lens was proposed for the LED source array. And LightTools-SolidWorks bridge was used to design and optimize.The Die-Imaging and Yellow Hue Phenomena of spot was solved.The maximum diameter of the double-layer lens was 40 mm, height was only12 mm, the double-layer lens has advantage of compact and miniaturization. The simulation and experiment results show that the efficiency of the light system were efficiency up to85% While the lens matched with SMD 3030 LED of 3×3 array. Light is soft and uniform and has no obvious Yellow Hue Phenomena.The lens is used for the actual spotlight.
Keywords:illumination design  LED source array  double-layer lens  yellow hue phenomena  die imaging  
点击此处可从《电子科技》浏览原始摘要信息
点击此处可从《电子科技》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号