Abstract: | The huge comendite ignimbrite- forming eruption of Tianchi Volcano maintained a stable plinian column during its earlier stage of eruption, and succeeded a collapsing of the column producing pumiceous ignimbrite deposits. It is estimated that the column height (Hb) varied from 20km to 10km in its eruption period, with a maximum height of 25km in the eruption peak. Its umbrella cloud spread into the stratosphere with a top height of 35km (Ht). The dense lithics whose diameter exceeded 8cm followed a ballistics trajectory in a 3km - high gas thrust region, while the smaller lithics and pumices entered the convection region in the column. The initial magma temperature was 780℃. The comendite magma had an exit velocity of 300m/s, volatile content of about 1wt% and lithics of 8.5wt%. From a 400m - wide vent the magma was expelled out with a mass eruption rate of 108.36kg/s, corresponding to a volume rate of 104.95m3/s. Over 1. 3436 × 1019J of energy had been released from Tianchi Volcano, of which the kinetic proportion was about 8 %. The plume had a temperature of -50℃ at the base focus of the cloud and a upward speed of 215m/s. The cloud spread out at a gradually downspeed with the increasement of distance from its center. For example, at a distance of 25km from its center the spreading velocity is about 250m/s, and is about 60m/s at distance of 100km. The main part of the plinian column, that is the convection region, once occurred in the height between 3 to 25km, and its maximum width was about 13km in radius. |