| 两种中碳铬镍钼钢高温回火态的延性断裂韧度 |
| |
| 引用本文： | 王静宜,石崇哲.两种中碳铬镍钼钢高温回火态的延性断裂韧度[J].兵器材料科学与工程,1994,17(1):32-37. |
| |
| 作者姓名： | 王静宜 石崇哲 |
| |
| 作者单位： | 西安工业学院，西安工业学院材料系 |
| |
| 摘 要： | 通过对阻力曲线（Ｊ＿Ｒ－△ａ）的剖析，结合ＴＥＭ组织和ＳＥＭ断口分析，研究了两种中碳铬镍钼钢高温回火态的延性断裂韧度。结果表明：在５００～５９０℃回火时条件断裂韧度Ｊ＿（０．２）随回火温度升高而增大，而启裂断裂韧度Ｊ＿ｉ随回火温度变化的规律较为复杂。这是因为决定材料抵抗裂纹启裂能力大小的主要因素是Ｊ＿ｃ（弹性分量），而ｄＪ＿ｐ／ｄａ则能明显影响裂纹稳定扩展能力的大小。
|
| 关 键 词： | 延性断裂韧度，中碳铬镍钼钢，高温回火 |
INVESTIGATION OF DUCTILE FRACTURE TOUGHNESS FOR TOW TEMPERED Cr-Ni-Mo STEELS |
| |
| Wang jingyi.INVESTIGATION OF DUCTILE FRACTURE TOUGHNESS FOR TOW TEMPERED Cr-Ni-Mo STEELS[J].Ordnance Material Science and Engineering,1994,17(1):32-37. |
| |
| Authors: | Wang jingyi |
| |
| Abstract: | Through the resistance curves(J_R-△a) measurement and in conbination with the TEM microstructure and SEM surface fracture analysis,the ductile fracture toughness of two high tempered medium carbon Cr-Ni-Mo steels was investigated.Results show that in 500～590℃ range,with the increase of tempering temperature,the J_(0.2)increases monotonously,however the change law of J_i appears more complicate.The elastic component(Je)is the control factor which can influence the ability of initial cracking,the stable propagating capacity of a crack is obviously affected by the value of dJ_p/da. |
| |
| Keywords: | ductile fracture toughness medium carbon Cr-Ni-Mo steel high temperature tempering |
| 本文献已被 CNKI 维普 等数据库收录！ |
