首页 | 官方网站   微博 | 高级检索  
     

原子吸收光谱法测定钨合金中痕量铁
引用本文:王洪元,杨梨容,余长秀,吴建碧,唐杰,赵伟. 原子吸收光谱法测定钨合金中痕量铁[J]. 特钢技术, 2013, 0(4): 50-51,66
作者姓名:王洪元  杨梨容  余长秀  吴建碧  唐杰  赵伟
作者单位:[1]绵阳师范学院化学与化学工程学院,四川绵阳621000 [2]四川省科学城神丁钨钼有限公司,四川绵阳621000
基金项目:项目支助:绵阳市科技局重大专项(编号:12J005)
摘    要:钨合金试样中含有钨、铁、锰等元素,将钨合金试样经盐酸-硝酸在加热的条件下滴加氢氟酸溶解后,加入锶盐以消除其他元素对铁的干扰,采用原子吸收分光光度法对其中铁元素含量进行了测定。结果显示,微量铁的质量百分含量为0.3341%,其RSD为2.1976%,加标回收率为97%~101%。该方法测定速度快,灵敏度高,干扰小,结果准确可靠。

关 键 词:原子吸收光谱法  钨合金  微量铁

Determination of Trace Fe inTungsten Alloy by AAS
Wang Hongyuan,Yang Lirong,Yu Changxiu,Wu Jianbi,Tang Jiea,Zhao Wei. Determination of Trace Fe inTungsten Alloy by AAS[J]. Special Steel Technology, 2013, 0(4): 50-51,66
Authors:Wang Hongyuan  Yang Lirong  Yu Changxiu  Wu Jianbi  Tang Jiea  Zhao Wei
Affiliation:Wang Hongyuan, Yang Lirong, Yu Changxiu, Wu Jianbi, Tang Jiea, Zhao Wei
Abstract:The tungsten alloy contains W, Fe, Mg, and other elements.After adding hydrofluoric acid into the muriatic acid-nitric acid under the condition of heating to dissolve tungsten alloy sample, the strontium salt was added into the solution to eliminate the interference from other element on iron and the iron content was determined by AAS.The results showed that mass percentage of trace iron is 0.3341%, RSD is 2.1976%and recovery rate is 97%-101%. This method has several advantages, such as fast determing, high sensitivity, less interference and ralialbe results.
Keywords:AAS  Tungsten alloy  Trace iron
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号