A force control high-order single-step-β method (HSM) for substructure pseudo-dynamic testing |
| |
引用本文: | 陈再现,王焕定,王凤来,周广春.A force control high-order single-step-β method (HSM) for substructure pseudo-dynamic testing[J].哈尔滨工业大学学报(英文版),2010,17(6):873-879. |
| |
作者姓名: | 陈再现 王焕定 王凤来 周广春 |
| |
作者单位: | School of Civil Engineering, Harbin Institute of Technology, Harbin 150090, China |
| |
基金项目: | Sponsored by the National Natural Science Foundation of China (Grant No. 50508012). |
| |
摘 要: | This paper proposes a new technique which introduces the high-order single-step-β method(HSM)into the experimental study on the substructure pseudo-dynamic testing(SPDT).The technique is based on the proposed concept of equivalent shear stiffness which can meet the requirement of the HSM algorithm.A study is done to theoretically validate the technique by the numerical analysis of two-storey shear building structure,in comparison of the proposed substructure pseudo-dynamic testing algorithm with the central difference method(CDM).Then,a full-scale SPDT model,the three-storey frame-supported reinforced concrete short-limb masonry shear wall structure,is designed and tested to simulate the seismic response of the corresponding six-storey structure and verify the proposed force control HSM technique.Meanwhile,the techniques of both stiffness correction and force control are suggested to control algorithmic error,control error and measurement error.The results indicate that the force control HSM can be used in the full-scale multi-degree-of-freedom(MDOF)substructure pseudo-dynamic testing before descent segment of structure restoring force properties.
|
关 键 词: | high-order single-step-β method(HSM) force control equivalent shear stiffness correction full-scale model |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
| 点击此处可从《哈尔滨工业大学学报(英文版)》浏览原始摘要信息 |
|
点击此处可从《哈尔滨工业大学学报(英文版)》下载全文 |