首页 | 官方网站   微博 | 高级检索  
     

不同热解终温对化产品收率的影响
引用本文:张飏. 不同热解终温对化产品收率的影响[J]. 洁净煤技术, 2012, 0(5): 76-79
作者姓名:张飏
作者单位:煤炭科学研究总院北京煤化工研究分院,北京100013
摘    要:为了研究不同热解终温对低阶煤热解产品产率及性质的影响,在750,800,850℃的热解温度下,利用1 kg热解和化产品回收装置对煤样进行了模拟热解实验研究。结果表明:3个温度所得兰炭都属于V-1级和FC-1级,750℃时兰炭产率、Vd均较高。气相产物中,H2和CO含量均较高,3个温度中的H2产量均大于40.00%,且850℃含量最高;CO则在750℃时取得最大值(17.14%)。最后对热解化产品的组成及收率进行了分析测定。为了更好地指导生产,对化产品收率及性质的预测应在理论研究的基础上,结合模拟热解实验研究。

关 键 词:模拟热解  化产品回收  热解终温

Influence of pyrolysis tem rature on yields of chemical products
ZHANG Yang. Influence of pyrolysis tem rature on yields of chemical products[J]. Clean Coal Technology, 2012, 0(5): 76-79
Authors:ZHANG Yang
Affiliation:ZHANG Yang ( Beijing Research Institute of Coal Chemistry, China Coal Research Institute, Beijing 100013, China)
Abstract:To study the influence of different pyrolysis temperature on low rank coal pyrolysis product yield and quality ,simulate coal pyrolysis at 750,800,850℃ using 1 kg chemical production recovery equipments. The results show that, at the given temperature, all semicokes are grade V-1 and FC-1, the semicoke yield and V,l is higher at 750℃. H2 and CO are higher than other products in gasification products. H2 production reaches the highest at 850℃ and its yield is more than 40 percent at these three temperatures. The maximum yield of CO2 is 17.14 percent at 750℃. Analyse and determine the components and yields of pyrolysis products. To better guide the production, the analysis and determination should be combined with simulation experiments.
Keywords:simulated pyrolysis  chemical production recovery  pyrolysis temperature
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号