| 多应力结构CMOS器件的模拟研究 |
| |
| 引用本文： | 施昊,周东,张庆东,顾晓峰. 多应力结构CMOS器件的模拟研究[J]. 半导体技术, 2008, 33(12) |
| |
| 作者姓名： | 施昊 周东 张庆东 顾晓峰 |
| |
| 作者单位： | 江南大学,信息工程学院,江苏,无锡,214122;江南大学,信息工程学院,江苏,无锡,214122;江南大学,信息工程学院,江苏,无锡,214122;江南大学,信息工程学院,江苏,无锡,214122 |
| |
| 基金项目： | 教育部新世纪优秀人才支持计划(NCET-06-0484) |
| |
| 摘 要： | 使用TCAD仿真工具Sentaurus在45 nm节点工艺下模拟研究了包含多应力结构的应变Si CMOS器件。模拟所得的开关电流比与相同节点工艺下报道的实验结果能很好吻合,验证了所用模型及方法的正确性。用Sentaurus工艺模拟工具得到了器件内部的应力和掺杂分布,并用Sentaurus器件模拟工具分析了各种应力结构对电学特性的影响。结果表明：在nMOS中,SMT和DSL能有效提高器件性能,而STI却会降低器件性能;在pMOS中,SiGe S/D和DSL的存在是性能改善的主要原因,而STI对性能改善的帮助较小。
|
| 关 键 词： | 多应力结构 应变硅 互补金属氧化物半导体 模拟 |
Simulation Research on CMOS Device with Multiple Stressors |
| |
| Shi Hao,Zhou Dong,Zhang Qingdong,Gu Xiaofeng. Simulation Research on CMOS Device with Multiple Stressors[J]. Semiconductor Technology, 2008, 33(12) |
| |
| Authors: | Shi Hao Zhou Dong Zhang Qingdong Gu Xiaofeng |
| |
| Abstract: | CMOS device with multiple stressors was studied using the TCAD simulation tool Sentaurus at 45 nm process node.The on/off current ratio obtained by simulation shows the same tendency as published experiment results,verifying the correctness of the simulation model and method used.The stress and doping distributions in the device were obtained by Sentaurus process,and the effects of various stressors on the electrical properties were investigated by Sentaurus device.Results indicate that stresses induced by ... |
| |
| Keywords: | multiple stressors strain-silicon CMOS simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
