首页 | 官方网站   微博 | 高级检索  
     

变质莱氏体钢中共晶碳化物的热处理粒化
引用本文:崔向红,王树奇,吴宏,姜启川. 变质莱氏体钢中共晶碳化物的热处理粒化[J]. 吉林大学学报(工学版), 2002, 32(1): 42-46
作者姓名:崔向红  王树奇  吴宏  姜启川
作者单位:吉林大学材料科学与工程学院,吉林,长春,130025
基金项目:国家自然科学基金资助项目 (5 97710 0 3)
摘    要:研究了变质莱氏体钢中共晶碳化物的粒化过程 ,探讨了碳化物的粒化机理。结果表明 ,变质莱氏体钢的粒化过程为 :热处理温度T <1 1 0 0℃为碳化物均匀溶解阶段 ,T≥ 1 1 0 0℃为共晶碳化物在其晶格畸变能较大处溶断和随后由曲率半径决定的断网和粒化阶段。变质处理使共晶碳化物中产生的孪晶等晶格缺陷增多 ,降低了共晶碳化物的稳定性 ,加快了共晶碳化物的粒化动力学过程。

关 键 词:莱氏体钢  变质处理  共晶碳化物  粒化
文章编号:1671-5497(2002)01-0042-05
修稿时间:2000-06-19

Granulation of Eutectic Carbide through Heat-treatment in Modified Ledeburite Steel
CHUI Xiang hong,WANG Shu qi,WU Hong,JIANG Qi chuan. Granulation of Eutectic Carbide through Heat-treatment in Modified Ledeburite Steel[J]. Journal of Jilin University:Eng and Technol Ed, 2002, 32(1): 42-46
Authors:CHUI Xiang hong  WANG Shu qi  WU Hong  JIANG Qi chuan
Abstract:Granular procedure of eutectic carbide in modified ledeburite steel is studied and granular mechanism of eutectic carbide is discussed.The results show that the granular procedure is as follows: T <1100℃ even dissolution of carbide, T ≥1100℃ dissolution and disconnection of carbide occur at places with higher energy from crystal distortion,and afterwards disconnection and granulation are controlled by curvature radius;modification increase twin and crystal defects in carbide,which decreases stability of carbide.As a result,granulation of carbide is accelerated.
Keywords:ledeburite steel  modification  eutectic carbide  granulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号