| 济钢1750m3高炉渣处理系统的工艺设计与改进 |
| |
| 引用本文： | 黄德立,王建新,富丽雁. 济钢1750m3高炉渣处理系统的工艺设计与改进[J]. 山东冶金, 2006, 28(3): 18-20 |
| |
| 作者姓名： | 黄德立 王建新 富丽雁 |
| |
| 作者单位： | 济南钢铁集团总公司,山东,济南,250101;济南钢铁集团总公司,山东,济南,250101;济南钢铁集团总公司,山东,济南,250101 |
| |
| 摘 要： | 济钢1#1750m3高炉采用嘉恒法渣处理设备,生产中存在设备处理能力不足、水量不平衡及管道磨损等问题。济钢2#1750m3高炉的设计吸取了1#高炉的经验,增加了1台单体设备,形成两用一备的工作制度,增设1座大型平流沉淀池,并对管路系统进行了优化,解决了在1#高炉中存在的问题,运行良好。同时,对渣处理系统的水渣运输、蒸汽处理等遗留问题提出了改进建议。
|
| 关 键 词： | 高炉 渣处理系统 嘉恒法 优化设计 |
| 文章编号： | 1004-4620(2006)03-0018-03 |
| 收稿时间： | 2006-03-08 |
| 修稿时间： | 2006-03-08 |
Process Design and Improvement of Slag Disposal System for Jigang's 1750m3 BF |
| |
| HUANG De-li,WANG Jian-xin,FU Li-yan. Process Design and Improvement of Slag Disposal System for Jigang's 1750m3 BF[J]. Shandong Metallurgy, 2006, 28(3): 18-20 |
| |
| Authors: | HUANG De-li WANG Jian-xin FU Li-yan |
| |
| Affiliation: | Jinan Iron and Steel Group Corporation, Jinan 250101,China |
| |
| Abstract: | The slag disposal equipment of Jiaheng process is used for Jigang's 1# 1750m3 blast furnace.But there are installation capacity deficiency,the unbalance in water and the pipeline abrasion etc.Based on Jigang's 1#1750m3 blast furnace design,by adding one single equipment,forming the working regime of two-orpration and one standby,putting up one large horizontal flow sediment tank in the design of the slag disposal system for Jigang's 2# 1750m3 blast furnace and optimizing the pipeline system,all problems existed in the 1# blast furnace are resolved and the system run all right.At the same time,the improvement suggestions for the slag transportation and steam treatment etc are put forward. |
| |
| Keywords: | blast furnace slag disposal system Jiaheng process optimizing design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
