| 新型陶瓷托辊专用磨床磨削颤振稳定性分析 |
| |
| 引用本文： | 王冬生,段有明,杨立洁,王桂梅,张华栋.新型陶瓷托辊专用磨床磨削颤振稳定性分析[J].机床与液压,2019,47(20):130-133. |
| |
| 作者姓名： | 王冬生 段有明 杨立洁 王桂梅 张华栋 |
| |
| 作者单位： | 河北工程大学机械与装备工程学院,河北邯郸,056038;河北工程大学机械与装备工程学院,河北邯郸,056038;河北工程大学机械与装备工程学院,河北邯郸,056038;河北工程大学机械与装备工程学院,河北邯郸,056038;河北工程大学机械与装备工程学院,河北邯郸,056038 |
| |
| 基金项目： | 河北省科技计划项目 (17211906D);2019年河北省研究生创新资助立项项目(CXZZSS2019068) |
| |
| 摘 要： | 为了避免陶瓷托辊专用磨床在加工过程中产生颤振而降低磨削质量,根据陶瓷托辊磨削加工机制,建立了陶瓷托辊磨削加工过程数学模型,通过MATLAB计算分析得出磨削深度与主轴转速的稳定性叶瓣图,确定了陶瓷托辊磨床在磨削深度低于4 mm时可无颤振稳定磨削。研究结果为陶瓷托辊专用磨床稳定磨削加工提供了参考。
|
| 关 键 词： | 陶瓷托辊专用磨床 磨削加工 稳定性 |
Analysis of Grinding Chatter Stability for Special Grinding Machine for Ceramic Idler |
| |
| Abstract: | In order to avoid chattering in the process of special grinding machine for ceramic roller, according to the grinding mechanism of ceramic roller, a mathematical model of grinding process for ceramic roller was established. The stable lobe diagram of grinding depth and spindle speed was obtained by MATLAB calculation and analysis, and the grinding quality of ceramic roller grinder was determined. When the cutting depth is lower than 4 mm, there is no chatter and the machine can grind stably. The research results provide reference for stable grinding of special grinding machines for ceramic idlers. |
| |
| Keywords: | Special grinding machine for ceramic idler Grinding process Stability |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
