| 基于VB的数控编程预处理 |
| |
| 引用本文： | 杨健,李宏穆,曾兵. 基于VB的数控编程预处理[J]. 机械设计与制造, 2006, 0(2): 84-86 |
| |
| 作者姓名： | 杨健 李宏穆 曾兵 |
| |
| 作者单位： | 成都理工大学,成都,610051 |
| |
| 基金项目： | 成都理工大学校科研和教改项目 |
| |
| 摘 要： | 这里综合分析了在数控加工中用直线段及圆弧段拟合、逼近非圆曲线及列表曲线的处理方法及算法,在满足加工精度和实时性要求的条件下,以C语言为算法核心、以VB6.0为平台,开发用于平面轮廓曲线数值计算的数控编程预处理系统,该系统主要实现的功能包括曲线初始参数和条件的输入;C语言程序运行控制及线形的模拟;刀位轨迹摸拟;NC代码生成输出等。可极大的简化中低档数控机床上数控加工程序编写前的数值计算过程,提高数控编程效率。
|
| 关 键 词： | 平面轮廓曲线 数据预处理系统 |
| 文章编号： | 1001-3997(2006)02-0084-02 |
| 收稿时间： | 2005-05-26 |
| 修稿时间： | 2005-05-26 |
The pretreatment system based on VB for numerical control programming |
| |
| YANG Jian,LI Hong-mu,ZHENG Bing. The pretreatment system based on VB for numerical control programming[J]. Machinery Design & Manufacture, 2006, 0(2): 84-86 |
| |
| Authors: | YANG Jian LI Hong-mu ZHENG Bing |
| |
| Affiliation: | Chengdu University of Technology, Chengdu 610051 ,China |
| |
| Abstract: | Based on the analysis of the arithmetic of fitting and approaching non-circularity curves and tabulate curves by line and arc in the numerical control milling, a pretreatment system for the numerical control programming based on plat of VB6.0 is introduced, the system can meet the requirement of cut accuracy and real-time control. It's function include functional curves' parameter inputting ; C program running; curves and cutter's location simulating; NC codes outputting and so on. Which would not only simplify the process of numerical calculation before milling on low and mid level NC machine but also improve the efficiency of NC programming. |
| |
| Keywords: | VB |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
