| 工业CT系统空间分辨力测试方法 |
| |
| 引用本文： | 郭智敏,倪培君,乔日东,唐盛明,李红伟,王晓艳. 工业CT系统空间分辨力测试方法[J]. 无损检测, 2011, 0(11): 13-16,20 |
| |
| 作者姓名： | 郭智敏 倪培君 乔日东 唐盛明 李红伟 王晓艳 |
| |
| 作者单位： | 中国兵器科学研究院宁波分院,宁波315103 |
| |
| 摘 要： | 介绍了工业CT系统空间分辨力的测试方法，研究了扫描参数对CT系统空间分辨力的影响规律。采用直接、间接测试方法分别测试了三套工业CT系统的空间分辨力。结果表明，在相同试验条件下，直接测试方法的测试结果要明显高于间接测试方法。最后，对试验结果及测试方法之间的等效关系进行了探讨。
|
| 关 键 词： | 工业CT 空间分辨力 标准试件 调制传递函数 扫描参数 |
Study on Assessment Techniques for ICT Scanner Spatial Resolution Measurement |
| |
| GUO Zhi-Min,NI Pei-Jun,QIAO Ri-Dong,TANG Sheng-Ming,LI Hong-Wei,WANG Xiao-Yan. Study on Assessment Techniques for ICT Scanner Spatial Resolution Measurement[J]. Nondestructive Testing, 2011, 0(11): 13-16,20 |
| |
| Authors: | GUO Zhi-Min NI Pei-Jun QIAO Ri-Dong TANG Sheng-Ming LI Hong-Wei WANG Xiao-Yan |
| |
| Affiliation: | (The Ningbo Branch of Ordnance Science Institute of China, Ningbo 315103, China) |
| |
| Abstract: | This paper represents the subjective method and objective method, which were dedicated to the assessment of spatial resolution in CT system, and analyses the influence rule of scan parameters on the spatial resolution of CT image. The comparative study of the two methods was carried out in 3 ICT systems under the same condition, and it was found that the test resul, of subject method was significantly higher than the result of object method, and then the test result and relationship between two methods was discussed. |
| |
| Keywords: | Industrial CT Spatial resolution Test object MTF Scan parameters |
| 本文献已被 维普 等数据库收录！ |
|
