首页 | 官方网站   微博 | 高级检索  
     

多层多跨钢板剪力墙水平极限承载力分析
引用本文:邵建华,顾强,申永康.多层多跨钢板剪力墙水平极限承载力分析[J].土木与环境工程学报,2008,30(2):71-74.
作者姓名:邵建华  顾强  申永康
作者单位:1. 河海大学,土木工程学院,南京,210098
2. 苏州科技学院,土木工程系,苏州,215011
摘    要:通过相关文献的钢板剪力墙试验数据验证了使用等效拉杆模型并利用SAP2000有限元软件进行Pushover分析计算多层钢板剪力墙水平极限承载力方法的正确性。利用试验验证的有限元分析方法分别研究了4层单跨钢板剪力墙和4层3跨钢框架-钢板剪力墙双重抗侧力体系在倒三角型分布的水平荷载作用下剪力墙板高厚比的变化对结构水平极限承载力的影响,并与相应纯框架的结构性能进行了比较,建议剪力墙板的高厚比取为250~300,这为钢板剪力墙的设计提供了理论依据。

关 键 词:钢板剪力墙  极限承载力  等效拉杆模型  Pushover分析  高厚比
文章编号:1006-7329(2008)02-0071-04
修稿时间:2007年11月25

Horizontal Ultimate Bearing Capacity Analysis of Multi-story Multi-span Steel Plate Shear Wails system
SHAO Jian-hu,GU Qiang,SHEN Yong-kang.Horizontal Ultimate Bearing Capacity Analysis of Multi-story Multi-span Steel Plate Shear Wails system[J].Journal of Civil and Environmental Engineering,2008,30(2):71-74.
Authors:SHAO Jian-hu  GU Qiang  SHEN Yong-kang
Affiliation:College of Civil Engineering, Hohai University, Nanjing 210098, China;;Department of Civil Engineering, College of Science and Technology of Suzhou, Suzhou 215011,China;College of Civil Engineering, Hohai University, Nanjing 210098, China;
Abstract:The effectiveness of equivalent strip model calculating the horizontal ultimate bearing capacity of multi-story steel plate shear walls(SPSW)by using the software SAP2000 to make Pushover analysis was demonstrated by comparing the simulated values with results from experimental studies performed by different researchers.The effect of different slenderness ratios on the ultimate bearing capacity of four-story single-span SPSW and four-story three-span dual steel shear walls system subjected to the inverse triangular load was obtained by the verified analytical model,which was compared with the performance of corresponding bare frames.The slenderness ratio of 250~300 is suggested for the design of SPSW.
Keywords:steel plate shear walls(SPSW)  ultimate bearing capacity  equivalent strip model  pushover analysis  slendernes ratio
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《土木与环境工程学报》浏览原始摘要信息
点击此处可从《土木与环境工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号