首页 | 官方网站   微博 | 高级检索  
     

圆锥形中空钢管混凝土叠合短柱试验研究
引用本文:任庆新,孙明海,贾连光.圆锥形中空钢管混凝土叠合短柱试验研究[J].工程力学,2014,31(12):134.
作者姓名:任庆新  孙明海  贾连光
作者单位:1.沈阳建筑大学土木工程学院,沈阳 110168;
基金项目:国家自然科学基金项目(51478275);建设部科技计划资助项目(2013-K2-15);辽宁省质量技术监督局资助项目(2012DB155B)
摘    要:该文对12个圆锥形中空钢管混凝土叠合短柱进行了轴压试验,探讨了锥度、截面直径及是否内置钢管对圆锥形中空钢管混凝土叠合短柱轴压力学性能的影响,建议了圆锥形中空钢管混凝土叠合短柱轴压承载力计算式。结果表明:锥度、截面直径及是否内置钢管对圆锥形中空钢管混凝土叠合短柱轴压性能影响显著;建议的极限承载力计算式计算结果与试验结果总体上吻合较好,可用来预测圆锥形中空钢管混凝土叠合短柱的截面抗压 强度。

关 键 词:圆形截面    中空钢管混凝土叠合柱    短柱    锥形柱    承载力计算式
收稿时间:2012-07-15

TESTS ON CIRCULAR TAPERED HOLLOW STEEL TUBE REINFORCED CONCRETE STUB COLUMNS
Affiliation:1.School of Civil Engineering, Shenyang Jianzhu University, Shenyang 110168, China;2.Department of Civil Engineering, Tsinghua University, Beijing 100084, China
Abstract:A total of 12 circular tapered hollow sreel tube reinforced concrete stub columns subjected to axial compression were tested. The main parameters were the tapered angle, the diameter of a crossing section and with or without embedding a hollow steel tube. The influences of different parameters on the compressive mechanical properties of these specimens are discussed. Based on this, a simplified formula is put forward to calculate stub column bearing capacity. The test results show that the influence of the three parameters on the compressive specimens are very obvious, and the calculated results show a good agreement with the experimental results, and the formula can reasonably evaluate the ultimate bearing capacity of circular tapered hollow steel tubes reinforced concrete stub columns.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《工程力学》浏览原始摘要信息
点击此处可从《工程力学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号