首页 | 官方网站   微博 | 高级检索  
     

低碳高强度双相钢丝的组织与性能
引用本文:杨丽颖,王守仁,王红岩,王砚军.低碳高强度双相钢丝的组织与性能[J].热加工工艺,2004(3):14-16.
作者姓名:杨丽颖  王守仁  王红岩  王砚军
作者单位:济南大学,机械工程学院,山东,济南,250022
摘    要:对20双相钢丝的组织与性能进行了研究。结果表明,随着亚温淬火温度的升高,双相组织中马氏体的亚结构由孪晶型变成位错型,两相的变形能力和拉拔性能都得到改善。变形量是影响位错数量及其在双相组织中形成位错胞的主要因素。较高温度亚温淬火钢丝经深度拉拔(79%)后,能得到好的强度、弯曲次数和扭转次数的配合。

关 键 词:双相钢丝  亚温淬火  冷拉拔变形
文章编号:2001-3814(2004)03-0014-03
修稿时间:2003年9月24日

Microstructure and Properties of Low-carbon High Strength Dual Phase Steel Wire
YANG Li-ying,WANG Shou-ren,WANG Hong-yan,WANG Yan-jun.Microstructure and Properties of Low-carbon High Strength Dual Phase Steel Wire[J].Hot Working Technology,2004(3):14-16.
Authors:YANG Li-ying  WANG Shou-ren  WANG Hong-yan  WANG Yan-jun
Abstract:Microstructure and properties of dual-phase steel wire were studied.It is shown that with the incresaing of subcritical quenching temperature,the substructure of martensite in dual-phase microstructure changes form twin-type to dislocation type,and the deformation capability and drawing properties of both phases are improved.The amount of deformation is a key factor that effect the amount of dislocation and the forming dislocation cell in dual-phase microstructure.After the steel wire of subcritical quenching at a higher temperature was deeply drawn to 79%,very high tensile strength with satisfactory numbers of bending and twising was gained.
Keywords:dual-phase steel wire  subcritical quenching  cold drawing
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号