| 超硬铝合金LC9的超塑性效应 |
| |
| 引用本文： | 刘林生,刘玉文,刘文俊,曾宪文.超硬铝合金LC9的超塑性效应[J].吉林大学学报(工学版),1989(1). |
| |
| 作者姓名： | 刘林生 刘玉文 刘文俊 曾宪文 |
| |
| 作者单位： | 吉林工业大学机械工程系
(刘林生)，吉林工业大学金属材料工程系
(刘玉文，刘文俊)，吉林工业大学金属材料工程系(曾宪文) |
| |
| 基金项目： | 国家自然科学基金的资助:5860274 |
| |
| 摘 要： | 本文采用了简单的预处理工艺,开发超硬铝合金LC9的超塑性;并以等温拉伸试验和等温压缩试验相互对照、相互补充的试验方法,考察LC9的超塑性唯象学特性。结果表明,该合金的最高延伸率可达220％,m值为0.4,流动应力最低可达10MPa;最佳超塑性变形条件为:温度420℃,应变速率1.67×10~(-3)s~(-1)。
|
| 关 键 词： | 超硬铝合金 超塑性 预处理工艺 |
Superplasticity in A Commercial Al-Zn-Mg Alloy |
| |
| Liu Linssheng Liu Yuwen Liu Wenjun Zeng Xianwen.Superplasticity in A Commercial Al-Zn-Mg Alloy[J].Journal of Jilin University:Eng and Technol Ed,1989(1). |
| |
| Authors: | Liu Linssheng Liu Yuwen Liu Wenjun Zeng Xianwen |
| |
| Affiliation: | Liu Linssheng Liu Yuwen Liu Wenjun Zeng Xianwen |
| |
| Abstract: | Superplastic elongations in a high strength commercial Al-Zn-Mg-Cu alloy were developed by applying a simple pretrcatment techniqe to this material prior to tensile test. Both tension and compers.sion were used to study the alloy's superplastic deformation behavior. Test results show that the maximum elongation is 220%, the strain rate censitivitv index is 0.4 and the lowest flow stress is only 10 MPa. The optimum superplasticity deformation condition is at 420℃ and with the initial strain rate 1 .67 × 10-2 s- 1. |
| |
| Keywords: | high strength aluminu m alloy superplas ticity pretratment technique |
| 本文献已被 CNKI 等数据库收录！ |
