| 基于Mutisim10的电子电路故障诊断 |
| |
| 引用本文： | 韩路杰,郝永生,谢建华,袁成营. 基于Mutisim10的电子电路故障诊断[J]. 兵工自动化, 2008, 27(10): 81-82 |
| |
| 作者姓名： | 韩路杰 郝永生 谢建华 袁成营 |
| |
| 作者单位： | 军械工程学院,导弹工程系,河北,石家庄,050003;军械工程学院,导弹工程系,河北,石家庄,050003;军械工程学院,导弹工程系,河北,石家庄,050003;军械工程学院,导弹工程系,河北,石家庄,050003 |
| |
| 摘 要： | 将Mutisim10仿真软件应用于电子电路故障诊断。首先根据实际电路中故障现象及示波器测量输出波形分析可能的故障元件及故障元件可能存在的故障，并设置第一步分析出的故障元件的相应故障。接着仿真设置后的电路，观察示波器的输出波形是否与实际电路的故障现象一致。若一致，检验实际电路的相应元件是否出现相应故障，反之改变设置元件的“fault”属性，直到输出的故障现象与实际电路一致为止。
|
| 关 键 词： | Mutisim10 故障诊断 仿真 |
Fault Diagnosis of Electronic Circuit Based on Multisim10 |
| |
| HAN Lu-jie,HAO Yong-sheng,XIE Jian-hua,YUAN Cheng-ying. Fault Diagnosis of Electronic Circuit Based on Multisim10[J]. Ordnance Industry Automation, 2008, 27(10): 81-82 |
| |
| Authors: | HAN Lu-jie HAO Yong-sheng XIE Jian-hua YUAN Cheng-ying |
| |
| Affiliation: | (Dept. of Missile Engineering, Ordnance Engineering College, Shijiazhuang 050003, China) |
| |
| Abstract: | Use Mutisim10 simulation software in the fault diagnoses of electronic circuit.First,analyze the possible fault components and faults depending on graph transformed by the oscilloscope.Then set the same fault in the simulated circuit.Check whether the graph after simulating is consistent to the graph got from the real circuit.If they are,check the corresponding component.If they are not,modify the "fault" attribute of the simulated circuit till the two graphs are consistent. |
| |
| Keywords: | Mutisim10 Fault diagnoses Simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
