首页 | 官方网站   微博 | 高级检索  
     

模拟体液中纯钛及Ti6A14V合金的腐蚀行为
引用本文:郭亮,梁成浩,隋洪艳. 模拟体液中纯钛及Ti6A14V合金的腐蚀行为[J]. 中国有色金属学报, 2001, 11(1): 107-110
作者姓名:郭亮  梁成浩  隋洪艳
作者单位:大连理工大学 化工学院,
基金项目:辽宁省科学技术基金资助项目(972210)
摘    要:采用电化学测试技术研究了人体医用金属材料工业纯钛和Ti6A14V合金在人工模拟体液中的腐蚀行为,结果表明,阳极极化后两种合金均未发现点蚀,工业纯钛的维钝电流密度小于于Ti6A14V合金,前者的阳极极化性能优于后者,Ti6A14V合金缝隙试样在阳极电位超过+2000mV(vsSCE)后,电流开始急剧增大,发生了缝隙腐蚀;通过电子探针分析发现,在缝隙内Al和V两种元素发生活性溶解。工业纯钛在电位达到+4000mV/(vsSCE)时仍没有发生缝隙腐蚀。

关 键 词:人体医用金属材料 工业纯钛 TI6A14V合金 腐蚀行为 电化学测试
文章编号:1004-0609(2001)01-0107-04
修稿时间:2000-04-17

Corrosion behavior ofcommercially pure Ti and Ti6Al4V alloy in artificial body fluid
GUO Liang,LIANG Cheng-hao,SUI Hong-yan. Corrosion behavior ofcommercially pure Ti and Ti6Al4V alloy in artificial body fluid[J]. The Chinese Journal of Nonferrous Metals, 2001, 11(1): 107-110
Authors:GUO Liang  LIANG Cheng-hao  SUI Hong-yan
Abstract:The corrosion behavior of surgery medical materials commercially pure Ti (abridged as CPTi ) and Ti6Al4V alloy in Ringer's artificial body fluid was studied with electrochemical methods. The results show that no pitting corrosion is found on these two alloys. The passivation current density of CPTi is lower than that of Ti6Al4V, which indicates that the former's anodic polarization capacity is better than the latter's. With the polarization potential over than 2 000 mV(vs SCE), the crevice corrosion happens on Ti6Al4V alloy sample. However that is not found on CPTi sample when the potential is 4 000 mV(vs SCE). The EPMA analysis of Ti6Al4V alloy crevice corrosive sample shows that Al and V actively dissolve, then migrate and electrically deposit. [
Keywords:surgery medical materials  commercial pure Ti  Ti6Al4V alloy  corrosion behavior
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号