Numerical validation of a finite element thin‐walled beam model of a composite wind turbine blade

This paper presents a numerical validation of a thin‐walled beam (TWB) finite element (FE) model of a realistic wind turbine rotor blade. Based on the theory originally developed by Librescu et al. and later extended to suit FE modelling by Phuong, Lee and others, this computationally efficient yet accurate numerical model is capable of capturing most of the features found in large blades including thin‐walled hollow cross section with variable thickness along the section's contour, inner reinforcements, arbitrary material layup and non‐linear anisotropic fibre‐reinforced composites; the present application is, for the time being, restricted to linearity. This one‐dimensional (1D) FE model allows retaining information of different regions of the blade's shell and therefore approximates the behaviour of more complex three‐dimensional (3D) shell or solid FE models more accurately than typical 1D FE beam models. A 9.2 m rotor blade, previously reported in specialized literature, was chosen as a case study to validate the static and dynamic behaviour predicted by a TWB model against an industry‐standard 3D shell model built in a commercial software tool. Given the geometric and material complexities involved, an excellent agreement was found for static deformation curves, as well as a good prediction of the lowest frequency modes in terms of resonance frequencies, mode shapes and frequency response functions; the highest (sixth) frequency mode shows only a fair agreement as expected for an FE model. It is concluded that despite its simplicity, a TWB FE model is sufficiently accurate to serve as a design tool for the recursive analyses required during design and optimization stages of wind turbines using only readily available computational tools. Copyright © 2011 John Wiley & Sons, Ltd.