| 医用手术缝合针化学抛光工艺的研究 |
| |
| 引用本文： | 张书第,安成强,赵平,张发余. 医用手术缝合针化学抛光工艺的研究[J]. 电镀与精饰, 2011, 33(2): 30-33 |
| |
| 作者姓名： | 张书第 安成强 赵平 张发余 |
| |
| 作者单位： | 张书第,ZHANG Shu-di(沈阳理工大学,环境与化学工程学院,辽宁,沈阳,110159;东北大学,材料与冶金学院,辽宁,沈阳,110819);安成强,赵平,张发余,AN Gheng-qiang,ZHAO Ping,ZHANG Fa-yu(沈阳理工大学,环境与化学工程学院,辽宁,沈阳,110159) |
| |
| 摘 要： | 结合不锈钢医用手术缝合针在化学抛光中所存在的实际问题,对化学抛光溶液成分进行优选,改变其化学抛光的工艺参数,通过光泽度检测、腐蚀率的计算,考察各组分及工艺参数对抛光效果的影响和对腐蚀质量损失的影响,筛选出既有较好抛光效果,较小腐蚀质量损失、又有较低抛光成本的化学抛光工艺.
|
| 关 键 词： | 医用手术缝合针 不锈钢 化学抛光 |
Chemical Polishing Technology of Medical Surgery Suture Needle |
| |
| ZHANG Shu-di,AN Gheng-qiang,ZHAO Ping,ZHANG Fa-yu. Chemical Polishing Technology of Medical Surgery Suture Needle[J]. Plating & Finishing, 2011, 33(2): 30-33 |
| |
| Authors: | ZHANG Shu-di AN Gheng-qiang ZHAO Ping ZHANG Fa-yu |
| |
| Affiliation: | ZHANG Shu-di1,2,AN Gheng-qiang1,ZHAO Ping1,ZHANG Fa-yu1(1.College of Environment and Chemical Engineering,Shenyang University of Science and Technology,Shenyang 110159,China,2.College of Material and Metallurgy Engineering,Northeast University,Shenyang 110819,China) |
| |
| Abstract: | With considering the problems existing in chemical polishing of stainless steel medical surgery suture needle,the influence of polishing solution composition and processing parameters on the polishing quality and corrosion resistance of suture needle were investigated.Through experimental tests,optimum chemical polishing parameters under which the needle had a better polishing effect,higher corrosion resistance and lower cost were obtained. |
| |
| Keywords: | medical surgery suture needle stainless steel chemical polishing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
