| Ba0.5MgyAl12-xMnxO19红色荧光粉的合成工艺及发光性能研究 |
| |
| 引用本文： | 袁秋华,杨儒,李友芬,刘见祥. Ba0.5MgyAl12-xMnxO19红色荧光粉的合成工艺及发光性能研究[J]. 北京化工大学学报(自然科学版), 2005, 32(5): 53-56 |
| |
| 作者姓名： | 袁秋华 杨儒 李友芬 刘见祥 |
| |
| 作者单位： | 北京化工大学材料科学与工程学院，北京 100029 |
| |
| 摘 要： | 通过溶胶-凝胶（Sol-Gel）法制备了碱土金属多铝酸盐荧光粉Ba0.5MgyAl12-xMnxO19，其中0.1≤x≤0.8, 0.3≤y≤1.0。利用差热分析和XRD等实验技术，研究了荧光粉的形成过程及合成条件。确定最佳烧结温度为1250℃，灼烧时间为3.5～5h。通过分光光度计测定了其发光性能，发光体的最大发射峰波长位于676nm。通过透射电镜可知，发光体的粒径在20～60nm之间，属纳米级发光材料。
|
| 关 键 词： | 荧光粉 溶胶-凝胶法 多铝酸盐 发光性能 荧光粉 溶胶-凝胶法 多铝酸盐 发光性能 |
| 收稿时间： | 2004-12-29 |
| 修稿时间： | 2004-12-29 |
Synthesis and luminescent properties of Ba0.5MgyAl12-xMnxO19 red phosphor prepared by Sol-Gel method |
| |
| YUAN Qiu-hua,YANG Ru,LI You-fen,LIU Jian-xiang. Synthesis and luminescent properties of Ba0.5MgyAl12-xMnxO19 red phosphor prepared by Sol-Gel method[J]. Journal of Beijing University of Chemical Technology, 2005, 32(5): 53-56 |
| |
| Authors: | YUAN Qiu-hua YANG Ru LI You-fen LIU Jian-xiang |
| |
| Affiliation: | College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China |
| |
| Abstract: | Ba0.5MgyAl12-xMnxO19 was synthesized by Sol-Gel method and the phase of the synthesized material was analyzed by using x-ray diffraction. The reaction process was characterized by TG-DTA at different temperatures ranging from the room temperature to 1200℃. The optimal calcinated temperature and time are 1250℃ and 3.5～5h, respectively. The luminescence was detected by a phosphor luminometer (PL). The maximum emission peak is at 676nm when fired at 1250℃, corresponding to the red light. Ba0.5MgyAl12-xMnxO19 powder is a nano crystal with diameter ranging from 20 to 60nm testified by using TEM. |
| |
| Keywords: | fluorescence powders Sol-Get polyaluminate luminescence |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《北京化工大学学报(自然科学版)》浏览原始摘要信息 |
|
点击此处可从《北京化工大学学报(自然科学版)》下载全文 |
