|
|||||
|
|
| 骶髂关节脱位钉板内固定与关节拉力螺钉内固定两种置入方法的三维有限元分析 | |
| 引用本文： | 张景僚,顾立强,张美超,刘世敬. 骶髂关节脱位钉板内固定与关节拉力螺钉内固定两种置入方法的三维有限元分析[J]. 中国组织工程研究与临床康复, 2010, 14(13). DOI: 10.3969/j.issn.1673-8225.2010.13.013 |
| 作者姓名： | 张景僚 顾立强 张美超 刘世敬 |
| 作者单位： | 1. 解放军第一五五中心医院骨外科,河南省开封市,475003 2. 中山大学第一附属医院显微创伤骨科,广东省广州市,510080 3. 南方医科大学临床解剖研究所,广东省广州市,510515 |
| 摘 要： | 背景:有限元法能对复杂的结构、形态、载荷和材料力学性能进行应力分析比较,模拟的条件更接近正常,结果更加可信,已经是骨科生物力学研究中的重要手段.目的:以有限元分析方法建立骨盆骶髂关节(单侧)脱位模型,比较前路钉板内固定及骶髂关节拉力内固定治疗后的生物力学稳定性.方法:在正常骨盆三维有限元模型的基础上,截断骶髂关节问的骶髂前后韧带(包含骶髂骨间韧带)以及骶结节韧带和骶棘韧带等盆底韧带,造成骶髂关节脱位.分别在前路钉板内固定系统(共2块重建钢板6枚螺钉)及骶髂关节拉力螺钉内固定(2枚拉力螺钉)两种固定方法的模型上,加载后进行非线性有限元分析.计算该加载方式下的骨盆应力、应变及位移的分布情况.结果与结论:建立了高精度骨盆骶髂关节脱位两种内固定的三维有限元模型.通过应力应变云图分析与比较后发现,采用骶髂关节拉力螺钉内固定相对于前路钢板内固定移位的总位移小,应力分布均匀,无明显高度集中现象,固定强度更大,固定后的骨盆更稳定.利用有限元方法分析骨盆骶髂关节脱位两种内固定生物力学稳定性,具有较高真实性、精确度和可重复性,结果与其他生物力学实验结果相一致,能满足临床骨盆损伤研究的需要. |
| 关 键 词： | 骶髂关节脱位 重建钢板 拉力螺钉 有限元分析 数字化骨科技术 |
Three-dimensional finite element analysis of screw-plate fixation and joint lag screws fixation for sacroiliac joint dislocation |
|
| Zhang Jing-liao,Gu Li-qiang,Zhang Mei-chao,Liu Shi-Jing. Three-dimensional finite element analysis of screw-plate fixation and joint lag screws fixation for sacroiliac joint dislocation[J]. Journal of Clinical Rehabilitative Tissue Engineering Research, 2010, 14(13). DOI: 10.3969/j.issn.1673-8225.2010.13.013 | |
| Authors: | Zhang Jing-liao Gu Li-qiang Zhang Mei-chao Liu Shi-Jing |
| Affiliation: | Zhang Jing-liao1,Gu Li-qiang2,Zhang Mei-chao3,Liu Shi-Jing1 1Department of Orthopaedics,155th Central Hospital of Chinese PLA,Kaifeng 475003,Henan Province,China,2Department of Orthopaedic,Trauma , Microsurgery,First Affiliated Hospital of Sun Yat-sen University,Guangzhou 510080,Guangdong Province,3Institute of Clinical Anatomy,Southern Medical University,Guangzhou 510515 |
| Abstract: | BACKGROUND:Finite element analysis(FEA)can be applied to compare stress of complicated structure,morphology,load,and material property,and it is being considered as an important method in orthopaedic biomechanical research.OBJECTIVE:To prepare sacroiliac joint dislocation models by FEA,and to compare biomechanics stability of two internal fixation treatments for sacroiliac joint dislocation.METHODS:All the ligaments situated in half sacroiliac joint were cut on the normal three-dimensional finite element mo... |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
