首页 | 官方网站   微博 | 高级检索  
     

刚果(金)某难选铜钴矿选矿工艺技术研究
引用本文:王立刚.刚果(金)某难选铜钴矿选矿工艺技术研究[J].有色金属(选矿部分),2012(3):11-14.
作者姓名:王立刚
作者单位:1. 北京矿冶研究总院矿物加工科学与技术国家重点试验室,北京,100070
2. 中冶集团铜锌有限公司,北京,100028
摘    要:针对刚果(金)某铜钴矿可浮性较差、粗选回收率较低、含易浮脉石较多等问题,通过浮选工艺方案对比试验,采用预先硫化方案及选择适当抑制剂等方法,采用一次粗选、两次扫选、三次精选工艺流程,最终获得的选矿闭路试验指标为:精矿含铜21.27%,钴9.93%,硫28.71%;铜回收率92.78%,钴回收率92.65%,硫回收率94.86%。

关 键 词:预先硫化  抑制剂  铜钴矿
收稿时间:2011/12/31 0:00:00
修稿时间:2012/3/28 0:00:00

The Mineral Processing Technological Research on a Refractory Copper-Cobalt Ore in R.D.Congo
Authors:wangligang
Affiliation:1(1.State Key Laboratory of Mineral Processing Science and Technology,Beijing General Research Institute of Mining and Metallurgy,Beijing 100070,China;2.MCC Tongsin Resources Ltd.,Beijing 100028,China)
Abstract:In this paper,the mineral processing technological research on a copper-cobalt ore,which is badly floatable,with low recovery of roughing and many floatable gangues and so on,are carried out.Comparative tests of flotation technology were also carried out.Adopting pre-sulphidization and proper depressant,by once-roughing,twice-scavenging and triple-cleaning,good closed-circuit beneficiation indexes were finally achieved and the final concentrates grading 21.27% Cu,9.93% Co and 28.71% S were obtained,at recoveries of 92.78% Cu,92.65% Co and 94.86% S.
Keywords:pre-sulphidation  depressant  Cu-Co ore
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《有色金属(选矿部分)》浏览原始摘要信息
点击此处可从《有色金属(选矿部分)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号