Enhanced microstructure and electrical properties of Mn-modified Bi0.5(Na0.65K0.35)0.5TiO3 ferroelectric ceramics |
| |
| Affiliation: | 1. Department of Physics and Astrophysics, University of Delhi, Delhi 110007, India;2. Department of Electronics, SGTB Khalsa College, University of Delhi, Delhi 110007, India;1. Department of Physics and Astrophysics, University of Delhi, Delhi 110007, India;2. Department of Electronic, SGTB Khalsa College, University of Delhi, Delhi 110007, India;1. School of Materials Science and Engineering, Xi''an University of Technology, Xi''an 710048, PR China;2. School of Mechanical Engineering, Xi''an Aeronautical University, Xi''an 710077, PR China;1. Crystal Lab, Department of Physics & Astrophysics, University of Delhi, Delhi-7, India;2. Department of Electronics, SGTB Khalsa College, University of Delhi, Delhi-7, India;1. School of Materials Science and Engineering, University of Ulsan, Ulsan, Republic of Korea;2. Department of Materials Science and Engineering, Faculty of Engineering, University of Kashan, Kashan, Islamic Republic of Iran;3. School of Materials Science and Engineering, Ulsan National Institute of Science and Technology, Ulsan, Republic of Korea;1. Electroceramics Research Group, Department of Physics, Birla Institute of Technology, Mesra, Ranchi, India;2. School of Advanced Materials Engineering, Changwon National University, Gyeong-Nam, 641-773, Republic of Korea |
| |
| Abstract: | Bi0.5(Na0.65K0.35)0.5TiO3 (BNKT) and Mn-modified Bi0.5(Na0.65K0.35)0.5(MnxTi1−x)O3 (BNKMT-103x), (x=0.0–0.5%) ferroelectric ceramics were synthesized by solid-state reaction method. Optimization of calcination temperature in Mn-doped ceramics was carried out for the removal of secondary phases observed in XRD analysis. BNKMT ceramics sintered at 1090 °C showed enhanced dielectric, piezoelectric and ferroelectric properties in comparison to pure BNKT. The average grain size was found to increase from 0.35 μm in BNKT to 0.52 μm in Bi0.5(Na0.65K0.35)0.5(Mn0.0025Ti0.9975)O3 (BNKMT-2.5) ceramics. The dielectric permittivity maximum temperature (Tm) was increased to a maximum of 345 °C with Mn-modification. AC conductivity analysis was performed as a function of temperature and frequency to investigate the conduction behavior and determine activation energies. Significant high value of piezoelectric charge coefficient (d33=176 pC/N) was achieved in BNKMT 2.5 ceramics. Improved temperature stability of ferroelectric behavior was observed in the temperature dependent P–E hysteresis loops as a result of Mn-incorporation. The fatigue free nature along with enhanced dielectric and ferroelectric properties make BNKMT-2.5 ceramic a promising candidate for replacing lead based ceramics in device applications. |
| |
| Keywords: | Lead-free Microstructure Diffuse phase transition Piezoelectric property Polarization fatigue |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
